jpex
.240 Incinerator
Posts: 9 
|
Post by jpex on Sept 2, 2016 12:42:25 GMT -5
Anyone shoot AA#9 with their 475 Linebaugh? I have H110 loads. I have 2400 loads. I have HS-6 loads.
I have 4227 loads. Accurates website has loads but I was looking for anyone's personal experience. I will
probably try the same load in my 500 JRH.
|
|
|
|
Post by glynn410 on Sept 3, 2016 11:26:07 GMT -5
I know you are looking for personal experience
but have you have looked up AA#9 on their web site-- they a lot of loads there-- as well Bing or gooogle-- AA#9 loads in the .475 - the last cal I want is a .475-- My son has a .500GNR and we have a number of .41s-- so that is all that is left have fun
|
|
|
|
Post by glynn410 on Sept 3, 2016 11:31:45 GMT -5
you might also check the reloader's nest
|
|
jpex
.240 Incinerator
Posts: 9
|
Post by jpex on Sept 3, 2016 23:21:02 GMT -5
Yes, I've checked Accurate Hornady Nosler Hodgdon IMR Alliant and a couple more. I was just looking for someone's personal experience as I haven't loaded any AA#9 for my 475L yet. |
|
Fowler
.401 Bobcat
Posts: 3,559
|
Post by Fowler on Sept 4, 2016 8:26:03 GMT -5
I know Brian Pearce wrote up loads using it for the 480 Ruger in Handloader magazine April 2016 issue 301. It might at least be a jumping off point for you.
|
|
jefats
.30 Stingray
Posts: 309
|
Post by jefats on Sept 7, 2016 15:42:52 GMT -5
I know Brian Pearce wrote up loads using it for the 480 Ruger in Handloader magazine April 2016 issue 301. It might at least be a jumping off point for you. Could anyone post this article of Brian's in Handloader 301 or copy a link? Thanks |
|
jpex
.240 Incinerator
Posts: 9
|
Post by jpex on Sept 7, 2016 18:23:39 GMT -5
Not 475L but I did load some 41 mag with AA#9 today. 16.5 gr. AA#9 and CCI 350 primer with a
210 gr Rem SP. Shot real good. Didn't chronogragh. It's under max depending on what manual you use
but it aughta kill a deer. I want to cast some 225 gr with my new Mountain Molds .411 mold but I
have about 1500 of these 210 Rems I'll use for deer. Shot the 475L some also. 400 gr cast with 23 gr
4227 with CCI350. Shot good too. Gotta empty some brass to try some AA#9 loads. Will load using
Accurate's website info. I'll post the results if it will help any loaders out there.
|
|
