|
Post by BigBore44 on Jul 21, 2016 16:11:58 GMT -5
Hi guys I would like to try some heavier bullets in my Single 7. I would like to just get a small supply (50,100) even 25, to try in my gun before jumping in too deep and buying hundreds+ of'em and/or a mold, only to find a problem. I know sometimes you can find sample packs but, not sure with these...? Is this the bullet I hear referred to (by "The Shootists", Dick, Fermin, Tank, Mike (Doc) just to name a few ) as the "Sledge Hammer"?? If not, who makes the SH and how heavy, type profile? These heavy styles are what I crave If someone could point me in the right direction, I would be grateful. I'm sorry my short post got loooong winded! Thank you Ray I have some on the way. Thank yoU, Dick....
|
|
|
Post by lscg on Jul 21, 2016 17:20:47 GMT -5
Ray, I could be mistaken but I believe the "Sledge Hammer" is a 135 gain bullet Fermin came up with. Todd's Bullet is a 120 grain FNGC and it's really accurate in my 327. there's some good info in this thread on that bullet singleactions.proboards.com/thread/14205/todd-corders-caliber-bullets-updateI just started casting and don't yet have a sizer die for the bullet otherwise i'd send you some. i'm not sure how Busy Todd is right now but he may be able to sell you some bullets if you can't find any elsewhere.
|
|
|
Post by 2 Dogs on Jul 21, 2016 17:55:49 GMT -5
Ray, the Sledgehammer Miha mold is a 135 grain GCHP. The Coder bullet is a 6 cavity Lee 120 grain FNGC. The Corder bullet is very accurate.
|
|
|
Post by 2 Dogs on Jul 21, 2016 17:56:00 GMT -5
PM me your information and I can shoot you a call and answer any questions you might have.
|
|
|
Post by sixshot on Jul 21, 2016 18:14:05 GMT -5
Ray, send me your address & I'll send you some 120's to try. These will be sized, powder coated & ready to rock!
Dick
|
|
|
Post by BigBore44 on Jul 21, 2016 21:07:11 GMT -5
Ray, send me your address & I'll send you some 120's to try. These will be sized, powder coated & ready to rock! Dick
PM Inbound.
Thank you, Dick. Ray
|
|
|
Post by BigBore44 on Jul 21, 2016 21:08:49 GMT -5
PM me your information and I can shoot you a call and answer any questions you might have. Fermin I will do that for sure just as soon as I get underway here with working on this 327.
Thank you Ray
|
|