|
Post by clintsfolly on Feb 7, 2016 17:16:51 GMT -5
Got a replacement barrel and going to try to do it my self if the stub is long enough. Am planning to use my big bench vice with hard wood blocks fit to the barrel. For a wrench make a hard wood leaver fit to the frame opening. After removing the old barrel will measure the two stubs. If the new is longer will see if it will need to be timed. If needs timing will rethink my plan. Have a Forcing cone kit with a cutter to fit the cylinder gap and if needed re cut the cone. Any comments on my plan or info that may help me not screw it up! Thanks Clint
|
|