|
|
Post by AxeHandle on Aug 19, 2009 11:12:19 GMT -5
Looking to see what powders were availalble to work up loads for my 500L. Got Blue Dot and H110 on the shelf... Thinking I needed some 2400 or H4227 but it was all on order. Saw some AA #9 so I looked at the Accurate manual for 500L loads.... Any of you guys getting good results with #9 in your 500L?
No. 9 350 CP WFNGC 26.6 1,337 29.5 1,485 34,120 1.737
No. 9 435 CP WFNGC 23.9 1,192 26.5 1,324 34,170 1.742
No. 9 520 CP LFNGC 19.8 1,027 22.0 1,141 34,040 1.860
No. 9 525 CP WFNGC 18.2 980 20.2 1,089 34,330 1.793
|
|
|
|
Post by crotalus on Aug 19, 2009 23:19:07 GMT -5
I've never tried it. But it's cool they list the loads for the 500 plus gr. bullets.
LP
|
|
COR
.375 Atomic
Posts: 1,529
|
Post by COR on Aug 21, 2009 10:27:44 GMT -5
|
|
lah
.30 Stingray
Posts: 432 
|
Post by lah on Aug 21, 2009 12:38:03 GMT -5
I bought 48 pounds of the stuff. Works great, just ask the guys at Cast Boolits. |
|
|
|
Post by lloydsmale on Aug 22, 2009 6:11:58 GMT -5
wc820/aa9 is probably my most used powder. I started buying it because of the cost but now would buy it even if it werent cheaper. Alot of my most accurate loads in everything from the 32s to the 500 linebaugh are with it. Just down download it much and for the most part use a mag primer and it works great. my go to load in the 500 is 27 grains with a 440 lfn and a cci 350. It is very accurate in both of my 500s
|
|
|
|
Post by AxeHandle on Aug 22, 2009 8:21:53 GMT -5
Now that is what I am looking for! Thanks Lloyd! My one experience with it to date included linadequate crimps and standard primers in a 454 SRH with a reduced power hammer spring... Bad juju in so many ways...  Looking for stuff to shoot in this Reeder 500L and MidSouth Shooter's Supply had some #9.. Actually wanted some 2400 and H4227 to try but there was none to be had... Ordered a few thousand CCI 350s too. Looked in the LR primer can later in the day and saw 6000 already there... Guess I did learn something from the 454 experience... ;D
|
|
