petep
.30 Stingray
Central Alabama
Posts: 453
|
Post by petep on Oct 7, 2013 11:40:57 GMT -5
What is available presently in a quality 2 cavity mold for casting a 115 grain,.32 H&R bullet that I could size to .313?
|
|
woody
.375 Atomic
Posts: 1,116
|
Post by woody on Oct 7, 2013 13:14:19 GMT -5
I have a Lyman 311316 it is a 115 grain gas checked flat point that my .32 H&R loves. I size mine to .313 of for another gun I use .311. I've shot it with a gas check and with out and had equal success. So I do t always use GC's.
|
|
chaz
.30 Stingray
Posts: 150
|
Post by chaz on Oct 7, 2013 19:08:34 GMT -5
Well, Lyman is not showing anything current at 115gr. But they have made several like the 311316, 3118(311008),
Saeco has the Saeco 4-Cavity Bullet Mold #322 32-20 WCF (313 Diameter) 118 Grain Flat Nose.
RCBS has a .310-120-RN N/R currently.
Hope this helps...probably have to spend some time on ebay. I did for the 3118 and other molds that I have now.
|
|
petep
.30 Stingray
Central Alabama
Posts: 453
|
Post by petep on Oct 8, 2013 5:28:17 GMT -5
Thanks guys ,I will keep looking!
|
|
|
|
Post by mohillbilly on Oct 13, 2013 11:59:09 GMT -5
|
|
|
|
Post by ranch23 on Oct 15, 2013 22:45:55 GMT -5
When hunting molds check out Mountain Molds. They have a cool online mold design program, not to mention they make nice molds.
|
|
|
|
Post by sheriff on Oct 16, 2013 11:04:06 GMT -5
You might also check out Accurate Moulds. I picked up a .32 105gr Keith-style 4-cavity from them reasonably. They have numerous .32 designs and weights in their catalog, or, you can design your own.
|
|
chaz
.30 Stingray
Posts: 150
|
Post by chaz on Oct 16, 2013 20:59:44 GMT -5
|
|
petep
.30 Stingray
Central Alabama
Posts: 453
|
Post by petep on Oct 17, 2013 5:17:42 GMT -5
WOW! Accurate Molds has a great selection!One thing I did not see was prices of their molds,is that on their site?
|
|
jsh
.327 Meteor
Posts: 884
|
Post by jsh on Oct 17, 2013 5:52:03 GMT -5
To get a price you have to go through the motions like you are going to order. This is because of the options you are able to choose from.
Jeff
|
|
petep
.30 Stingray
Central Alabama
Posts: 453
|
Post by petep on Oct 17, 2013 11:43:21 GMT -5
Thank you !
|
|
|
|
Post by kaytod on Oct 17, 2013 15:38:25 GMT -5
The one on the left is 135 grain, the one on the right is 120 grains. The 120's cast out a bit over .313 with my alloy. The mold was spec'd for .312 0 to plus .002. Cases L to R 32-20, 30 Carbine, 32 H&R  120's are a 6 cav  |
|
