|
Post by heyjoe63 on Aug 2, 2012 11:23:33 GMT -5
I have three very nice 20 thread per inch .44 caliber SAA barrels. These came off of 1950's vintage Great Western revolvers, but would also fit 1st/2nd Gen Colt, which I understan also use 20TPI barrels. They are nicely finished and quite nice, with the exception someone tried to change the caliber marking on the left sides of the barrels and was not very good at it. It's cosmetic and probably fixable, but beyond my skills. Pictures are of one barrel, they are all pretty much the same condition. Finsih is nicer/shinier than I can get in the pix. I'd like to sell the three as a lot if poss, but would split them up. Looking to get $50 each shipped or all three for $125.
|
|
kman68
.240 Incinerator
Posts: 27
|
Post by kman68 on Aug 8, 2012 13:11:44 GMT -5
have a 4 3/4 length?
|
|
|
Post by heyjoe63 on Aug 8, 2012 16:27:54 GMT -5
All three are 5 1/2". You could easily make a 4 3/4" out of it, a 7 1/2" not so much :-)
|
|