|
|
Post by kevshell on May 11, 2024 7:24:42 GMT -5
|
|
|
|
Post by rjm52 on May 11, 2024 8:24:39 GMT -5
Too bad the reloading dies aren't with it....
|
|
|
|
Post by kevshell on May 11, 2024 8:27:57 GMT -5
Too bad the reloading dies aren't with it.... Pictures would be even better...😁 |
|
|
|
Post by potatojudge on May 11, 2024 8:31:43 GMT -5
Too bad the reloading dies aren't with it.... Reeder sells Hornady dies at a reasonable price. He supports his wildcats better than Federal did their 338. If that goes cheap enough it’d be worth sending back for a new 41 mag cylinder. |
|
|
|
Post by rjm52 on May 11, 2024 8:46:29 GMT -5
Looked through his website and I know they are there somewhere but didn't see them...last I recall they were about $120...
He built the 5-shot .41 Bisley in my Avitar...have spoken to him about converting the .41 GNR cylinder to .410 but just haven't had the reason to do it...
250s are running 1450 from the standard .41 case and just don't know if I need anything more than that...
|
|
|
|
Post by 45MAN on May 11, 2024 12:10:07 GMT -5
GONNA WATCH THIS ONE. ANYWAY OF TELLING IF IT HAS THE REMOVABLE FIRING PIN FROM THE PICTURES?
|
|
|
|
Post by bushog on May 11, 2024 12:21:00 GMT -5
Too bad the reloading dies aren't with it.... Reeder sells Hornady dies at a reasonable price. He supports his wildcats better than Federal did their 338. If that goes cheap enough it’d be worth sending back for a new 41 mag cylinder. My thoughts exactly….. |
|
|
|
Post by randominator on May 11, 2024 12:22:30 GMT -5
Just dropped a bid. Not sure if I'm going to run it very high.
|
|
|
|
Post by potatojudge on May 11, 2024 13:10:46 GMT -5
Looked through his website and I know they are there somewhere but didn't see them...last I recall they were about $120... He built the 5-shot .41 Bisley in my Avitar...have spoken to him about converting the .41 GNR cylinder to .410 but just haven't had the reason to do it... 250s are running 1450 from the standard .41 case and just don't know if I need anything more than that... If you watch his forum he used to sale price his dies at $80-90 I think |
|
|
|
Post by bigbore5 on May 11, 2024 14:19:48 GMT -5
If only someone would cut the cord to his engraving machine! I've got two Redhawks and a Blackhawk by him all specifically ordered NO ENGRAVING!
|
|
