|
Post by gunsbam45 on Apr 16, 2024 22:40:35 GMT -5
I'm putting together a .50 Spl build with Hamilton, and am doing some research getting ready to trim down some brass on the lathe at Dad's and put some loads together. I just pulled out the load data you supplied for him showing the LBT 310, 350, and 400 grain FN bullets with W231, Unique, HS-6, HP38 and AA#5. My question is this:
Do you recall what gun you did the testing with?
|
|
|
Post by bushog on Apr 16, 2024 22:49:33 GMT -5
Stick with the Unique.
I’ve owned 3 Blackhawks and one Redhawk. All Bowen builds. I’ve got the NEI mold for the traditional RN bullets too…
|
|
|
Post by gunsbam45 on Apr 17, 2024 17:05:32 GMT -5
Stick with the Unique. I’ve owned 3 Blackhawks and one Redhawk. All Bowen builds. I’ve got the NEI mold for the traditional RN bullets too… Were all the Blackhawks 4 5/8 guns?
|
|
|
Post by bushog on Apr 17, 2024 18:35:18 GMT -5
Stick with the Unique. I’ve owned 3 Blackhawks and one Redhawk. All Bowen builds. I’ve got the NEI mold for the traditional RN bullets too… Were all the Blackhawks 4 5/8 guns? Yes. Longer barrel you might as well get a .500L
|
|
|
Post by taffin on Apr 18, 2024 18:53:44 GMT -5
I'm putting together a .50 Spl build with Hamilton, and am doing some research getting ready to trim down some brass on the lathe at Dad's and put some loads together. I just pulled out the load data you supplied for him showing the LBT 310, 350, and 400 grain FN bullets with W231, Unique, HS-6, HP38 and AA#5. My question is this: Do you recall what gun you did the testing with? I believe it was a custom Bowen Ruger Blackhawk
|
|
|
Post by gunsbam45 on Apr 18, 2024 19:48:21 GMT -5
I assume a 4 5/8" barrel gun?
Did you do some testing with H110 or W296, and if so, what did you find?
|
|