|
Post by rjm52 on Apr 16, 2024 13:47:06 GMT -5
|
|
|
Post by squawberryman on Apr 16, 2024 14:33:53 GMT -5
Beautiful gun full of life, and probably took some in the past.
|
|
brant
.30 Stingray
Posts: 341
|
Post by brant on Apr 16, 2024 15:14:54 GMT -5
I was just looking at that this morning.
|
|
|
Post by rjm52 on Apr 16, 2024 18:41:42 GMT -5
You look at what the unconverted ones are bringing...$1000+. One with a cut down barrel just brought $1350...
799 is very reasonable...especially if you like SBH gripframe...
|
|
|
Post by kings6 on Apr 16, 2024 18:52:47 GMT -5
Thank you Bob, we will see what happens. Good deal guys so feel free to jump in.
Robb
|
|
|
Post by rjm52 on Apr 16, 2024 19:12:12 GMT -5
|
|
|
Post by rjm52 on Apr 16, 2024 19:37:33 GMT -5
Hope you get it Rob...
|
|
|
Post by kings6 on Apr 16, 2024 21:04:41 GMT -5
I did! Thank you!
|
|
|
Post by contender on Apr 16, 2024 21:31:56 GMT -5
Robb,, I believe the base pin is wrong,, and pull those grips to see if they are marked "MR3-DB." If so,, it's a factory g/f.
|
|
|
Post by kings6 on Apr 16, 2024 21:47:50 GMT -5
Someone else's base pin but that is ok, I'm sure I have one in the box, If not I know a couple guys that will have one. Pretty sure it is a MR3-DB and not a Qualite or S&G but we will see once it arrives.
|
|
|
Post by contender on Apr 17, 2024 8:59:00 GMT -5
Not 100% sure about the brass g/f. I see a few very small things that make me wonder a bit. Of course,, the pictures are harder to try & get a good look at. Qualite did make a g/f that looked like the factory ones. Just curious to find out what it is.
If it's factory,, good score.
|
|
|
Post by blacktailslayer on Apr 17, 2024 13:46:03 GMT -5
Good grab Robb, I had been watching that one, couldn't talk myself into it.
Don D.
|
|
|
Post by kings6 on Apr 17, 2024 14:33:39 GMT -5
You know where it will be Don!
|
|
|
Post by blacktailslayer on Apr 18, 2024 13:41:19 GMT -5
Well, it is in goods hands now.
Don D.
|
|
|
Post by kings6 on Apr 18, 2024 13:49:35 GMT -5
Not so sure about that Don. Old flat tops tend to go under the knife here so I have to show restraint until I decide its fate.
|
|