|
|
Post by foxtrapper on Apr 8, 2024 14:16:55 GMT -5
50 mm bell, 30mm tube. Going on a bergara bolt rifle with picatiny rail. Suggest height and material! Thank!
|
|
|
|
Post by kevshell on Apr 8, 2024 16:56:14 GMT -5
My guess would be the high rings but the last time I had that question I called Leupold directly and they confirmed which rings I was going to need. I'm guessing The manufacturer of your scope could do that for you. And then there's the school thought that you need to do it for eye alignment which may mean you have to experiment with some different rings.
|
|
|
|
Post by cas on Apr 8, 2024 18:38:05 GMT -5
Stacks of pennies wrapped in tape. Or blocks of clay, to simulate rings and get a height.
Of course if you don't have the rifle yet.....
|
|
|
|
Post by foxtrapper on Apr 9, 2024 3:50:31 GMT -5
Forgot to add that the stock has an adjustable cheek piece. Leupold steel rings the way to go?
|
|
woody
.375 Atomic
Posts: 1,116
|
Post by woody on Apr 9, 2024 6:28:11 GMT -5
Forgot to add that the stock has an adjustable cheek piece. Leupold steel rings the way to go? Vortex or Warne make good rings also. |
|
|
|
Post by kevshell on Apr 9, 2024 6:37:00 GMT -5
I like the Leupold steel and the Warne Mountain Tech rings. Both are good.
|
|
|
|
Post by foxtrapper on Apr 9, 2024 12:38:56 GMT -5
Went with leupold steel high rings and one piece base! Thanks fellas!
|
|
