|
|
Post by longoval on Apr 1, 2024 22:21:36 GMT -5
From what I understand, Tyler T grips are still available(ish) but wait times and communication can be problematic. I have seen similar products that are polymer but those do not interest everyone. I came across what may be a more accurate representation of the original Tyler T design. They are aluminum with the brass tabs, as they should be. I ordered one and it fits pretty well. I do not have an original to compare it to but it looks the same to me. See eBay link below. It is from Robertson Trading Post. I apologize if this is common knowledge. www.ebay.com/itm/276058932869?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=wxXKgg-xQzm&sssrc=4429486&ssuid=zvxxdxu0RjO&var=&widget_ver=artemis&media=COPYI will try to post some pictures soon of it on my Pre Model 15, K38 Combat Masterpiece. |
|
markwell
.30 Stingray
Firearms resale value should be your children's problem
Posts: 328
|
Post by markwell on Apr 2, 2024 8:09:55 GMT -5
Looks like a Tyler to me....
|
|
|
|
Post by bushog on Apr 2, 2024 8:43:36 GMT -5
Problematic is a word for it. I did a pretty stupid thing and sent $$ for 5 t-grips about a year ago. AllI know is that they cashed my check not long after I sent it.
I knew they were difficult to deal with but didn’t think it would be this bad. Well, actually not difficult at all, there is NO dealing with them…..
Maybe I’ll get a surprise some day…..
|
|
|
|
Post by boatswainsmate on Apr 2, 2024 14:25:52 GMT -5
|
|
|
|
Post by mcquade on Apr 2, 2024 17:09:19 GMT -5
|
|
|
|
Post by enfield on Apr 3, 2024 6:21:10 GMT -5
I bought one of these recently and I'm satisfied with it. They are advertised as fitting K/L frames, but mine is on a 22-4 and doesn't have any weird gaps. I've never handled a Tyler T, so can't give comparisons between the two.
|
|
|
|
Post by x101airborne on Apr 3, 2024 7:05:26 GMT -5
I have had a couple from the e-bay seller above. Pretty correct as far as I can tell compared against the two originals I have. I did use a super fine file in a couple areas to get them to snug up a little better but it wasn't much. Overall I was happy with the purchase.
|
|
|
|
Post by strawhat on Apr 15, 2024 7:11:56 GMT -5
I am not sure who makes them for Robertson Trading but they look okay. Grip adapters have been around for enough time that any and all patents have run out.
They have been made or marketed by many firms, Mershon, Pachmyar, Tyler, and S&W have all offered their version. S&W had two different ones.
Tyler is still around. I get the impression it is a sideline for whoever owns it and they wait to get a number of orders before pouring the adapters and finishing them. Not sure, but considering the vastly different wait times, that is my take.
B K Grip Adapters are a resin product (as were Pachmyar, Mershon, and S&W). They are a decent product. And they ship soon after they receive an order.I have one and it is on one of my N frames.
Kevin
|
|
|
|
Post by ridenshoot on Apr 16, 2024 20:56:31 GMT -5
I'm pretty happy with my BK Grip adapter, fits good and stays put with no wiggle or shifting.  |
|
|
|
Post by strawhat on Apr 20, 2024 19:26:39 GMT -5
My latest Tyler T Grip, a gift from a fellow shooter,   This is the first bronze colored adapter I have seen in the flesh. I have shown it on my birth year 45 ACP Model 1050 Target Revolver. It also looks nice on my edc. Kevin |
|
|
|
Post by 45MAN on Apr 22, 2024 7:49:47 GMT -5
KEVIN: NICE "OLD TIME" LOOK ON A CLASSIC 1950 OF YESTERYEAR.
|
|
|
|
Post by rjm52 on Apr 22, 2024 17:34:15 GMT -5
|
|
|
|
Post by 45MAN on Apr 22, 2024 20:48:14 GMT -5
UNBELIEVEABLE, WHERE DO THESE IDIOTS BREED? |
|
|
|
Post by bigbore5 on Apr 22, 2024 22:07:12 GMT -5
For that it better come with the K-38 too! |
|
|
|
Post by rjm52 on Apr 23, 2024 5:37:44 GMT -5
"idiots"...For the price to get that high there has to be at least two of them...
|
|
