|
Post by revolvercranker on Dec 10, 2023 19:29:01 GMT -5
|
|
|
Post by LeverGunner on Jan 3, 2024 0:33:45 GMT -5
That is interesting. Thanks for sharing. The gent put together a nice rounded site about one of the most interesting subjects there is Leverguns and their cartridges.
|
|
|
Post by revolvercranker on Jan 3, 2024 12:23:21 GMT -5
A friend of mine seen a YouTube video on the comparison between a Henry 1873 (from the New current Henry Company) and the Uberti 1873. It was where they disassembled them and compared the internal parts, etc. Some of the parts inside the Henry 1873 they thought to be investment castings, whereas the Uberti were all machined. They they said the quality Uberti parts and workmanship appeared better then the Henry. Just saying, not pointing out which is better. I'm just glad we have all the gun manufacturers in today's climate.
|
|
|
Post by LeverGunner on Jan 3, 2024 23:17:48 GMT -5
Nothing wrong with investment casting, if it's done right - Ruger's frames for example.
|
|
|
Post by revolvercranker on Jan 4, 2024 12:05:18 GMT -5
A better stronger method, but more expensive, is forged.
|
|
|
Post by needsmostuff on Jan 5, 2024 10:31:53 GMT -5
Nothing wrong with investment casting, if it's done right - Ruger's frames for example. Nothing wrong with MIM parts if done right also. But that doesn't mean ANYBODY likes them.
|
|
aciera
.375 Atomic
Posts: 2,070
|
Post by aciera on Jan 9, 2024 16:58:44 GMT -5
CPM……another form of powdered metal……is incredible
Like T-15……the baddest High Speed Steel known to man. And mainly unknown to most machinists
Tempered to 67 RC
|
|
|
Post by revolvercranker on Jan 9, 2024 20:19:26 GMT -5
CPM……another form of powdered metal……is incredible Like T-15……the baddest High Speed Steel known to man. And mainly unknown to most machinists Tempered to 67 RC I don't want to get into a pissing contest, but O1 & D2 steels are pretty damn good and hard too and basically cold worked which is a forging except at normal temperature then hot forging.
|
|
|
Post by LeverGunner on Jan 9, 2024 22:01:03 GMT -5
I never had a problem with MIM parts in the Smith & Wessons I've had. I read about it some years back and moved on. So you might say that I don't have a problem with MIM parts.
|
|
|
Post by mhblaw on Jan 9, 2024 22:04:31 GMT -5
The point being is that a Winchester 1873 is an interesting rifle and the 44-40, or 44 WCF, is an interesting cartridge.
|
|
|
Post by x101airborne on Jan 10, 2024 7:16:15 GMT -5
The history read was WAY cool! Especially loved reading about the old primers before Winchester started their own.
|
|
|
Post by LeverGunner on Jan 10, 2024 10:09:14 GMT -5
The point being is that a Winchester 1873 is an interesting rifle and the 44-40, or 44 WCF, is an interesting cartridge. Absolutely!
|
|
aciera
.375 Atomic
Posts: 2,070
|
Post by aciera on Jan 12, 2024 21:29:21 GMT -5
CPM……another form of powdered metal……is incredible Like T-15……the baddest High Speed Steel known to man. And mainly unknown to most machinists Tempered to 67 RC I don't want to get into a pissing contest, but O1 & D2 steels are pretty damn good and hard too and basically cold worked which is a forging except at normal temperature then hot forging. If you look up grid ability of T-15……….. O1&D2 both grind with regular grinding wheels much easier than HSS T15 takes CBN, the CPM T15 grinds like HSS Non CPM is considered the transition between HSS and carbide Grinding 45 years Brought the first grinder to Linebaugh’s shop almost 30 years ago You want no part of T-15. Lol
|
|
|
Post by rkcohen on Jan 19, 2024 12:09:23 GMT -5
ref the new winchester lever guns - you can't fault japanese quality...
|
|
|
Post by rkcohen on Jan 19, 2024 12:09:38 GMT -5
ref the new winchester lever guns - you can't fault japanese quality...
|
|