gnappi
.375 Atomic
Posts: 1,394
|
Post by gnappi on Aug 15, 2023 19:40:00 GMT -5
I have a few holsters that were really made for the CASS / SASS folks and are not generally suited to belt "standard" widths of 1 1/2" to 1 3/4". I wear 1 3/4" belts and western holsters flop around a lot so the last couple of holsters I had made for me, I had the maker setup the belt hole to fit my belts and the gun slides out smoothly without binding or flopping around while walking. I also don't need a thigh strap. Thinking along these lines I have now cinched the hole up on one with brass Chicago screws instead of sewing them and it looks cleaner, and draws faster too without binding.
|
|
|
Post by contender on Aug 15, 2023 21:50:04 GMT -5
Looks like you've done an excellent job of modifying your holster to fit your needs!
|
|
|
Post by x101airborne on Aug 18, 2023 8:37:48 GMT -5
Keen idea. Mind showing the other side of the holster?
|
|
gnappi
.375 Atomic
Posts: 1,394
|
Post by gnappi on Aug 18, 2023 9:46:06 GMT -5
Keen idea. Mind showing the other side of the holster? Same as the back but the Chicago heads are smooth, and the revolver doesn't touch them.
|
|
|
Post by x101airborne on Aug 18, 2023 15:03:32 GMT -5
Awesome!!
|
|