|
Post by rjm52 on Feb 22, 2023 20:51:51 GMT -5
Had looked at the Uberti El Patron model for quite some time as a good candidate for conversion to .41 Special...ended up finding a Cattleman for very short money and sent that one instead...never did forget about them however... This afternoon after shooting with a friend we hit a couple of gun shops looking for anything interesting...second shop...hummmm... Uberti El Patron .357 Magnum... 3.5" Cowboy Mounted edition... www.ableammo.com/catalog/uberti-1873-cattleman-patron-cowboy-mounted-shooter-revolver-u349894-357-magnum-walnut-grip-blued-finish-p-121427.htmlAppears unfired, in the box with lock and all paperwork..extra set of screws...4-click...had just come in a few hours before on consignment ...priced right...why not... Got it home and after a search it appears to be a discontinued model... One quetion...appears one has to take the ERH off to pull the base pin enough to drop the cylinder out...or am I missing something.. A good day...Bob
|
|
|
Post by paul105 on Feb 22, 2023 20:57:40 GMT -5
|
|
|
Post by rjm52 on Feb 22, 2023 21:20:22 GMT -5
That is what I was already thinking..
|
|
|
Post by rjm52 on Feb 22, 2023 22:00:28 GMT -5
|
|
|
Post by rjm52 on Feb 22, 2023 22:07:27 GMT -5
..Looked at it closely and apparently they had it already figured out... Pin will pull all the way out under the ER tab when in one spot on the ERH... Got it apart...no evidence of being fired.
|
|
|
Post by Encore64 on Feb 23, 2023 6:47:42 GMT -5
Definitely sounds like a good one to snag...
|
|
cubrock
.401 Bobcat
TLA fanatic and all around nice guy....
Posts: 2,841
|
Post by cubrock on Feb 23, 2023 8:15:30 GMT -5
Those are nice and very handy revolvers. Good snag.
|
|