richp
.240 Incinerator
Posts: 61
|
tools
Jan 17, 2023 19:51:56 GMT -5
Post by richp on Jan 17, 2023 19:51:56 GMT -5
Where does a person find tools to work on revolyers? Tools to crown barrels,forcing cones and such. Thanks
|
|
|
Post by taffin on Jan 17, 2023 19:59:22 GMT -5
BROWNELLS & MIDWAY USA
|
|
|
Post by x101airborne on Jan 17, 2023 22:15:09 GMT -5
Yuup. But I am here to tell you straight. Using them is not as easy as it seems.
|
|
|
Post by 2 Dogs on Jan 17, 2023 22:36:45 GMT -5
Where does a person find tools to work on revolyers? Tools to crown barrels,forcing cones and such. Thanks Best done with a good lathe…
|
|
edk
.375 Atomic
Posts: 1,108
|
tools
Jan 17, 2023 22:52:42 GMT -5
Post by edk on Jan 17, 2023 22:52:42 GMT -5
I started collecting some of that specialty gunsmithing tooling before realizing how limiting they were and dumped them all for something more general purpose. Look on Craigslist or similar classified ad media for one of these: Sorry 2Dogs: I went off in search of a picture before you posted and by the time I could get it to work your reply was there!
|
|
|
Post by silcott on Jan 18, 2023 18:36:59 GMT -5
My gunsmith tools Justin
|
|
|
Post by cas on Jan 18, 2023 19:04:24 GMT -5
I started looking at used mini lathes to make brass on. Seems you can buy a much larger used one for not much more than a used mini lathe. The problem I have, as I'm sure many others do... I don't have any place to put a mini table top one, let alone a real one.
|
|
|
tools
Jan 18, 2023 22:25:35 GMT -5
Post by rickiesrevenge on Jan 18, 2023 22:25:35 GMT -5
Its worth finding the space.
I think Manson makes/made some of that tooling.
|
|
JM
.375 Atomic
Posts: 2,424
|
tools
Jan 18, 2023 22:47:45 GMT -5
Post by JM on Jan 18, 2023 22:47:45 GMT -5
My gunsmith tools... Justin Nice Shop!
|
|
|
tools
Jan 19, 2023 15:00:49 GMT -5
via mobile
Post by silcott on Jan 19, 2023 15:00:49 GMT -5
My gunsmith tools... Justin Nice Shop! Thanks Hard to slide in gun projects lately though. To busy doing work for other companies.
|
|
|
tools
Feb 5, 2023 7:41:43 GMT -5
via mobile
Post by singleaction on Feb 5, 2023 7:41:43 GMT -5
Its worth finding the space. I think Manson makes/made some of that tooling. Manson made a run of lineboring bushings, line reamers firing pin hole locaters etc., but there was not enough interest, so he didn’t make more. Wish he still had some, they are all sold out, and he won’t make more due to lack of demand.
|
|
|
tools
Feb 5, 2023 8:45:24 GMT -5
Post by x101airborne on Feb 5, 2023 8:45:24 GMT -5
I remember those. They looked great but the lay person could barely afford them.
|
|