|
|
Post by foxtrapper on Jan 31, 2021 15:02:08 GMT -5
Bomar cut firing pin stop?
|
|
|
|
Post by rjm52 on Feb 1, 2021 7:06:03 GMT -5
Don't have a picture but it is flat across the top to fit under the sight.
|
|
|
|
Post by Thumper on Feb 2, 2021 9:39:35 GMT -5
I don't have a photo of the FPS, but it's just shortened. Here is an article with some images of the slide's cut for it. www.brownells.com/aspx/learn/learndetail.aspx?lid=12540I use a forward mounted and buried Bo-Mar cut on the ones I build. It does not require modification to the FPS and is a bit more protected.  |
|
|
|
Post by rjm52 on Feb 2, 2021 18:35:51 GMT -5
Thumper...VERY nicely done. Do you do this professionally?...or are you connected with Nighthawk???
|
|
|
|
Post by foxtrapper on Feb 2, 2021 20:08:07 GMT -5
My first cut slide , I don’t like how chopped the stop is. I’ve had full size slide stops crack .
|
|
|
|
Post by Thumper on Feb 3, 2021 9:34:56 GMT -5
Thumper...VERY nicely done. Do you do this professionally?...or are you connected with Nighthawk???
That is a standard cut offered by Nighthawk. It takes a few hours for me to manually mill one. I am working on opening up shop, just not there, yet! No connection to Nighthawk other than as a parts customer that has been treated very well by them.
|
|
