caryc
.375 Atomic
Posts: 1,040
|
Post by caryc on Jan 19, 2010 20:18:16 GMT -5
I have a customer that was going to send me two Bisley frames for grips. I got an email from him saying that with the extra things he does for the 5 shot guns he was having trouble pulling the frames and might have to get Bowen to do it?
Does anyone know what this problem might be? Myself, I just can't imagine but then I don't have a Bowen 5 shot Bisley conversion.
|
|
papa
.30 Stingray
Posts: 235
|
Post by papa on Jan 19, 2010 21:29:34 GMT -5
I've had Hamilton build me four Bisley's so far, non of them five shot though, and I can't imagine what he could be referring to??
Papa
|
|
rigby
.327 Meteor
Posts: 769
|
Post by rigby on Jan 19, 2010 22:29:47 GMT -5
Loc-Tite?
|
|
|
Post by boxhead on Jan 19, 2010 23:53:07 GMT -5
My 5 shot Bowen Bisley comes just as easy as a standard Ruger. Not sure what the problem is, perhaps Loc-Tite as noted above. A properly fitted screwdriver should work fine even then. Mine has no Loc-Tite.
|
|
dana
.240 Incinerator
Greybull, Wyoming
Posts: 72
|
Post by dana on Jan 21, 2010 10:37:16 GMT -5
Is he aware of the two allen-head screws at the top?
Dana
|
|
caryc
.375 Atomic
Posts: 1,040
|
Post by caryc on Jan 21, 2010 12:12:10 GMT -5
Is he aware of the two allen-head screws at the top? Dana Aw, come on....... nobody is that dumb. ;D He said something about a support block that Bowen puts in his 5 shots that he has a special tool for to make it easier. I still can't picture what this could be. It sure would help if my customer would post a picture of his Bisley frame here, without the grips on it of course.
|
|
|
Post by bigbores on Jan 21, 2010 13:41:52 GMT -5
Only thing I can think he is talking about would be the bearing block which is used to hold the cylinder bolt against the frame rail but its attached on the main body and has nothing to do with the grip-frame. Sounds to me hes a little nervous about taking it apart/putting it back together himself.
|
|
|
Post by boxhead on Jan 21, 2010 15:25:04 GMT -5
Only thing I can think he is talking about would be the bearing block which is used to hold the cylinder bolt against the frame rail but its attached on the main body and has nothing to do with the grip-frame. Sounds to me hes a little nervous about taking it apart/putting it back together himself. I agree completely. The picture below shows this third screw (furthest to the left) that holds the bearing block in place. It, in no way, interferes with the removal of the grip frame as I have removed mine as noted above without a hitch.
|
|
papa
.30 Stingray
Posts: 235
|
Post by papa on Jan 21, 2010 16:47:28 GMT -5
Love that Lace Sycamore Box ;D
I gave a sizable piece of that to Hamilton thinking I could get some more, and haven't seen any since....
|
|
|
Post by sixshooter on Jan 21, 2010 17:18:06 GMT -5
Does Freedom Arms use any sort of bolt bearing block?
|
|
caryc
.375 Atomic
Posts: 1,040
|
Post by caryc on Jan 21, 2010 22:05:39 GMT -5
Love that Lace Sycamore Box ;D I gave a sizable piece of that to Hamilton thinking I could get some more, and haven't seen any since.... It's not Sycamore. It's Lace wood also known as silky oak, native to Australia and if I remember right that pair is stabilized.
|
|
|
Post by boxhead on Jan 22, 2010 11:30:23 GMT -5
Cary,
You remember correctly as they are stabilized. I just took the shine down a bit with rottenstone.
|
|