|
|
Post by snakereaper on May 2, 2020 22:06:30 GMT -5
Has any one ever used the 452 Missouri slammer coated bullets in a 460 s&w .it is a 325 grain. Hard cast that is powder coated and 18 brinell.
Or how about the Matt's bullets 315 long flat nose gas check in a 460.
|
|
|
|
Post by snakereaper on May 8, 2020 16:11:27 GMT -5
No one ? The Missouri slammer is suppose to be a hi tek coated wfn 325 grain they say its weight is actually 316 grains. Looking at it with either h110 or imr4227. Just going to load some and have some test loads for when the 460 arrives. Anyone ever try this bullet in a 45 colt or 454 or a 460 on deer and pigs.
|
|
|
|
Post by blackmamba on May 8, 2020 20:23:06 GMT -5
I've used both in hot loaded 45 Colts. Best load for hunting and the 325 Slammer was 18.0 gr of 2400 for about 1100 fps. Best load for the Matt's 315 GC was 18.5 gr of 4100, also about 1100 fps. Both were easily controlled and very accurate. I took a nice 9-point last November with the Slammer load, neck shot at 18 yards.   |
|
