|
|
Post by Quick Draw McGraw on Mar 30, 2020 17:54:19 GMT -5
Hi fellas,
Got a new revolver on the way and I am excited. What advice do you have on reloading this cartridge?
Do I need to use Rifle Primers or just Magnum Pistol Primers?
Also, what dies are recommended?
|
|
|
|
Post by 41freak on Mar 30, 2020 18:53:26 GMT -5
Large pistol, depending on powder used magnum primer. As for dies I use Hornady 44 mag dies but any good 44 mag dies will work. I also use the Redding profile crimp die to crimp my loads but a good roll crimp works as well. My favorite loads run 300gr-320gr bullets and I don't try and push them super hard. I also like using hard cast bullets sized properly for the gun.
|
|
|
|
Post by potatojudge on Mar 30, 2020 22:46:37 GMT -5
IIRC Taffin used large pistol magnum primers
Todd Spotti recommended large rifle in the 414 SuperMag
Hodgdon lists large rifle for their loads
I suspect you could use either in the 445
|
|
|
|
Post by boatswainsmate on Mar 31, 2020 22:55:53 GMT -5
I made these bullets figuring one day I would buy a firearm strong enough to handle them. (NEI/SSK 310 429) If you would like to try some all I would ask is you pay the shipping and a little bit for the lead. Happy Shooting! Boats  |
|
|
|
Post by tonyrumore on Apr 1, 2020 11:09:03 GMT -5
FWIW, There is 445 load data in the Accurate Arms manual.
Tony
|
|
|
|
Post by bigbrowndog on Apr 1, 2020 13:46:33 GMT -5
As well as Hornady manual, and LoadData website
Trapr
|
|
