|
|
Post by lwfpdchief on Jan 8, 2020 16:33:55 GMT -5
Anybody use titegroup for 44 special. What is your setup
i am using a 255 gr Keith bullet over 5.6 grins of titegroup and a standard CCI 300 primer and star line cases.
how does this compare to the skeeter load.
i just loaded 50 of each. Won’t get to shoot until this weekend.
|
|
|
|
Post by z1r on Jan 8, 2020 17:36:31 GMT -5
If I remember correctly, I loaded 5.4 grains under a 225 RFN. Accuracy was excellent. Shot these in my Cimarron SAA clone. Been loading a slightly stouter load using Power Pistol in my Rugers.
|
|
|
|
Post by x101airborne on Jan 10, 2020 14:55:40 GMT -5
Interesting since my recent failure with my other loads.
May I ask where you got your data from?
|
|
|
|
Post by lwfpdchief on Jan 11, 2020 0:31:54 GMT -5
I’ll have to dig through my load data to find the source. I think max load was 6 grns
|
|
|
|
Post by harold89 on Jan 13, 2020 23:40:23 GMT -5
Just picked up a Ruger flattop bisley .44 special for my son. Think I’ll start right around 4.0 grains with a 240 LTC and go up from there and see what happens.
|
|
|
|
Post by junebug on Jan 14, 2020 0:00:19 GMT -5
My Modern Reloading second edition manual shows 4.0 to 4.8 gr of titegroup under a 240 gr lead bullet
|
|
|
|
Post by dougader on Jan 23, 2020 17:16:45 GMT -5
Lyman 49th has data with Titegroup for 44 Spl.
245 gr 429421, 4.5@715fps, 8,800CUP; MAX: 5.0@777 fps, 11,900 CUP
|
|
