|
Post by kings6 on May 27, 2019 10:51:28 GMT -5
No need for two of these presses since this one sets in the box. I've set it up once and loaded some 41s on it then stuck it back in the box. It also includes the Redding slide primer system option as well. The press is currently on sale at Midway for about $300 and the primer option is another $50+ so how about $285 for all the stuff in the original Redding box. This does NOT include shipping and these things are heavy so shipping will be whatever it costs to get it to the buyers address and this will be added to the cost of the press. I could possibly break it down into pieces and fit most of it in a large flat rate box but you would have to put the nuts and bolts back in place when it arrives or just bite the bullet and let me find the cheapest ground transportation I can find for it. You Will be hard pressed to find a stouter or easier 7 station turret press to use than this one.
The first "I will take it" followed by a pm get it. I will be taking off in 4-5 days so if someone commits soon, I can get it shipped before I leave for my trip. Otherwise it won't go out until mid June.
If no one here wants it in the next few days I will post it on the other sites when I get back from my trip.
Thanks for looking,
Robb
|
|
|
Post by AxeHandle on May 28, 2019 16:30:19 GMT -5
The turret has always looked like a good idea for those wildcats that include multiple case forming dies... Redding makes good stuff
|
|
|
Post by kings6 on May 28, 2019 16:33:38 GMT -5
It was nice to have all 4 41 dies mounted and available at one time on the press. Simple movement of the turret handle and boom you are the next step. A minute or so switching depths on a couple dies and the same set worked for 41 Special, 41 Mag and 414 Supermag. I used the Redding taper crimp die for the first time rather than my shortened RCBS crimp die and the thing does a great job.
|
|
|
Post by AxeHandle on May 29, 2019 6:21:16 GMT -5
One day I want it, the next day I don't.
|
|
|
Post by matt56 on May 29, 2019 14:29:15 GMT -5
I load cases start to finish with a powder measure mounted in my T-7. I love the thing, can’t believe I went so long without it
|
|
|
Post by kings6 on May 29, 2019 14:54:47 GMT -5
What brand of measure do you have mounted on the T-7?
|
|
gw425
.30 Stingray
Posts: 343
|
Post by gw425 on May 29, 2019 15:54:07 GMT -5
I'll take it Robb. PM me with a total.
Greg
|
|
|
Post by matt56 on May 29, 2019 16:32:36 GMT -5
What brand of measure do you have mounted on the T-7? I have a Redding BR-30. It has the same threads as a standard die and if you index it just the right way the handle doesn't touch the turret head.
|
|
|
Post by kings6 on May 29, 2019 16:49:34 GMT -5
Greg send me your address where it will be sent to and I’ll get a shipping gist and key you know the total. If I can get the address and get shipped tomorrow it won’t have to wait until mid June when I get back home. I leave Friday morning. I’m not worried about payment coming before I ship I just want to be able to tell you a total.
Robb
|
|
gw425
.30 Stingray
Posts: 343
|
Post by gw425 on May 29, 2019 16:54:27 GMT -5
PM sent.
Greg
|
|
|
Post by rjm52 on May 30, 2019 6:25:12 GMT -5
Great press....
I had a dozen presses about two years ago...sold off everything but two Dillon 550s for pistol loading and then bought a T-7 to replace everything else including a Foster Co-Ax....
|
|