|
Post by AxeHandle on Apr 3, 2022 14:56:22 GMT -5
Three years? Doesn't seem that long.... Seems like maybe 6 months.. You guys need to get it in gear and bob some hammers! Seriously... Stick this little beast in a chest holster, cover it with a Jacket, and there is a lot for the hammer to hang up on when you draw..
|
|
|
Post by AxeHandle on Apr 10, 2022 11:44:10 GMT -5
FWIW stick this thing in a chest holster and there is stuff for the hammer to snag on without covering it with a jacket.
|
|
|
Post by AxeHandle on Apr 10, 2022 11:45:02 GMT -5
New hammer. Already bobbed? Yep.
|
|
|
Post by AxeHandle on Apr 10, 2022 11:45:22 GMT -5
|
|
|
Post by AxeHandle on Apr 10, 2022 11:45:55 GMT -5
..and the cut.
|
|
|
Post by AxeHandle on Apr 10, 2022 11:47:25 GMT -5
Rough spot for sure.. I plan to put it in the gun and let it prove itself before I spend time polishing out the rough spot.
|
|
|
Post by 500fksjr on Apr 10, 2022 11:49:40 GMT -5
Oh that hurts to see a good hammer be attacked like that!
|
|
|
Post by AxeHandle on Apr 10, 2022 12:53:04 GMT -5
Install done... I'll verity 100% reliability before I spend any time on the scar...
|
|
|
Post by AxeHandle on Apr 10, 2022 12:53:22 GMT -5
|
|
|
Post by AxeHandle on Apr 10, 2022 12:53:37 GMT -5
|
|
|
Post by AxeHandle on Apr 10, 2022 12:53:52 GMT -5
|
|
|
Post by AxeHandle on Apr 10, 2022 12:55:07 GMT -5
With a 100% gun the plan will just be to polish and contour the cut to match the rest of the hammer.
|
|
|
Post by squawberryman on Apr 10, 2022 15:47:16 GMT -5
Looks like you cut it with a hammer sir
|
|
|
Post by AxeHandle on Apr 10, 2022 19:06:13 GMT -5
I'll just say it was cut.....
|
|
|
Post by wildbill on Apr 10, 2022 22:07:46 GMT -5
You can always correct the looks later. I would really like to know how reliable it is. Also, what type of ammo you will be shooting, factory or hand loads........
|
|