|
Post by rjm52 on Mar 15, 2019 12:07:50 GMT -5
One of the lever guns I love most of all are the Marlins that were made back in the 1980s and 90s that were chambered in .218 Bee, .25-20 and .32-20. They had a straight stock, 2/3s magazine and a tapered barrel that had the front sight dovetailed into the barrel.... Problem is I just don't want to get into another caliber...ie .32-20. I want a .327 Federal...
And yes, I could get a Henry but would prefer a Marlin.
So a question... To be able to keep the original barrel could:
1) The chamber area of the .32-20 be cut back, the gun rechambered and a new slot for the magazine and forend screw be milled...or;
2) Get a .25-20 and have it rebored/rechambered to .327....
Your thoughts would be appreciated....and who would you have do the work?
Bob
|
|
|
Post by Encore64 on Mar 15, 2019 12:11:42 GMT -5
Bob, your best bet is to find a Marlin 32 Magnum and simply rechamber it.
I bought the first Henry 20" 327 Federal out the door. Never had one regret.
|
|
scotth
.30 Stingray
Posts: 214
|
Post by scotth on Mar 15, 2019 13:21:38 GMT -5
i have the henry 16" 327 it is #10 out the door. no regret for me.
|
|
|
Post by rjm52 on Mar 15, 2019 14:40:20 GMT -5
Friend had one of the Marlin Cowboy .32 H&Rs...with the octagon barrel had the balance of a brick....that and it was a tube loading not through the receiver...would just prefer a classic well balanced rifle...
|
|
|
Post by magpouch on Mar 30, 2019 16:56:15 GMT -5
I'm lusting over the Henry rifle and carbine in .327 Mag. And pretty much all the other calibers too...
|
|