|
Post by 44magloader on Nov 20, 2018 0:47:10 GMT -5
Looking for new front sight for a SS Ruger Bisley. Any suggestions? Thanks.
|
|
|
Post by longrange2 on Nov 20, 2018 8:50:27 GMT -5
I’m looking for one too. I think Fermin may be getting some blanks in to make some but you’ll have to drill the hole in the sight blade yourself or have your gunsmith do it.
|
|
Shakey
.327 Meteor
Central Arkansas
Posts: 544
|
Post by Shakey on Nov 20, 2018 13:20:09 GMT -5
If all you need is the blade, I have gotten them from Ruger.
|
|
|
Post by longrange2 on Nov 20, 2018 14:13:11 GMT -5
I don't think that Ruger makes a Patridge style blade, I can't stand the factory ramped blade.
|
|
|
Post by 2 Dogs on Nov 20, 2018 15:22:52 GMT -5
Howdy boys! I am waiting on some blanks but here is the thing about the pin in blades you guys should all know:
The holes are not all in the same place. So, if you want to be sure your pin in blade fits right you will have to drill the blade yourself. Now it is very important you drill it in 2 steps. If not, you have a good chance the hole wont come out on the other side where you want it. So, you drill it part way on one side, and then finish drill it from the other side. It isn't that hard but it would be nice to have an extra pair of hands handy when you do it.
Then, you will STILL be stuck with the Ruger base. If you have a gunsmith install your pin in blade, and he uses his milling machine to locate the hole, keep in mind while he has the thing in the mill that Ruger base would benefit greatly from a little sculpting.....
|
|
JDG
.240 Incinerator
Posts: 70
|
Post by JDG on Nov 22, 2018 20:00:38 GMT -5
Anyone know if a S&W pin in front blade will fit in the ruger notch? There's actually some selection for S&W blades.
The workaround I'm using to deal with the ramp right now is Testors black model paint, then using a pencil eraser to get rid of the glossy surface.
|
|
|
Post by 2 Dogs on Nov 29, 2018 12:49:18 GMT -5
Ok, Bill sent me a pic of some front blades that will be coming my way. Stay tuned for a update.
|
|
|
Post by leftysixgun on Dec 6, 2018 6:56:26 GMT -5
Tell us what size drill we should use for installing the new blade ourselves
|
|
CBH
.240 Incinerator
Posts: 98
|
Post by CBH on Dec 6, 2018 17:03:10 GMT -5
I bought a blade from Clements several yrs ago. A tall serrated patridge with a slight angle to it. Not cheap tho.
|
|
|
Post by 2 Dogs on Dec 8, 2018 2:07:13 GMT -5
Ok, I got the pin in fronts for Rugers and a few for Smiths. I can take your requests however I’m not turning any out until I finish these BFR units. Thanks for your interest.
|
|
|
Post by bushog on Dec 8, 2018 6:36:29 GMT -5
Depending on the price I want the S&W blades.
Please PM me pricing and options?
Thanks!
|
|