|
|
Post by ncrobb on May 18, 2018 18:39:01 GMT -5
I imagine this has been covered before but I need to ask. Will a Ruger Bisley grip frame, hammer and trigger fit onto a Single Six frame? The Bisley grip frame is polished so I’m guessing it came off a Vaquero?
Robb
|
|
|
|
Post by bushog on May 18, 2018 18:56:34 GMT -5
Grip frame and trigger yes. You need a Single Six bisley hammer.
|
|
|
|
Post by ncrobb on May 18, 2018 20:11:21 GMT -5
Thank you. Now the hard part I’m guessing is finding said hammer.
|
|
|
|
Post by clintsfolly on May 18, 2018 20:30:50 GMT -5
There’s a Powers hammer for sale on the Ruger board.
|
|
|
|
Post by ncrobb on May 18, 2018 20:32:15 GMT -5
Thanks. That was my next stop.
|
|
Paden
.375 Atomic
Lower Goldstream Creek
Posts: 1,132
|
Post by Paden on May 18, 2018 20:34:59 GMT -5
Thank you. Now the hard part I’m guessing is finding said hammer. I had no trouble getting one from Ruger a year or two ago. |
|
|
|
Post by ncrobb on May 18, 2018 20:46:17 GMT -5
Wow, I figured they would play the “must be fitted” card. Thanks!
|
|
|
|
Post by 2 Dogs on May 18, 2018 21:02:46 GMT -5
Well, they will bolt up. That doesn’t mean that they won’t require fitting.
|
|
|
|
Post by AxeHandle on May 19, 2018 19:46:10 GMT -5
Properly fitted steel to steel can be something to see.. You can't catch an edge with a fingernail on this steel grip frame Bowen custom. Had a second gen Colt NF that was pretty much the same..  |
|
|
|
Post by ncrobb on May 19, 2018 20:35:52 GMT -5
NICE!
|
|
