|
327 Dies
Feb 20, 2018 12:03:28 GMT -5
via mobile
Post by barbarosa on Feb 20, 2018 12:03:28 GMT -5
All: Are there preferred dies for the 327 / 32 H&R? Any problems I should look for?
Thanks Barbarosa
|
|
|
Post by dougader on Feb 20, 2018 12:37:16 GMT -5
I have Redding dies and they do great for 32 Long, 32 HRM and 327 Federal
|
|
bones
.30 Stingray
Posts: 142
|
327 Dies
Feb 20, 2018 13:00:02 GMT -5
via mobile
Post by bones on Feb 20, 2018 13:00:02 GMT -5
I have RCBS dies...no problems for 32 Mag and 327 Fed in my Single Six and Single Seven. Load both cast and jacketed
|
|
|
Post by wildcatter on Feb 22, 2018 22:41:50 GMT -5
Redding here, 32 long H&R Mag but work great for the 327. Using them in the Rockchucker right now, but have the cal conv. for the 550 Dillon and will be finding out how they set up in the 550 die block, some dies I've heard others say they set supper high being held with few threads? I will be finding out shortly.
|
|
|
Post by barbarosa on Feb 24, 2018 18:51:24 GMT -5
Thanks everyone
|
|
|
Post by tinstarfirearms on Feb 24, 2018 19:43:14 GMT -5
I use the Hornady version. No issues here and they work on the Dillon 550.
Andrew
|
|
|
327 Dies
Mar 21, 2018 15:07:03 GMT -5
via mobile
Post by ss30378 on Mar 21, 2018 15:07:03 GMT -5
I have the lee 32hr dies. They have worked well for cast and jacketed. I turned the expander down .002 to get better neck tension on the little 60gr xtp but other than that they have been great.
|
|