Steve
.30 Stingray
Posts: 211
|
Post by Steve on Nov 2, 2017 17:06:17 GMT -5
I am looking to use these loads in a Ruger Flat Top Convertible 45 Colt45 ACP. It is built on a mid size Ruger frame and is safe for 22’000 to 23’000 psi. The load is a 300 grain wide flat nose hard cast lead gas check bullet over 9 grains o Unique in WW brass and large pistol primers. Opinions please? Thank you.
|
|
|
|
Post by Encore64 on Nov 2, 2017 17:09:18 GMT -5
It would be close. I use 10.0 grns Unique behind a 250 grn as absolutely maximum.
|
|
Steve
.30 Stingray
Posts: 211
|
Post by Steve on Nov 2, 2017 17:22:15 GMT -5
Thank you. I originally loaded these for a Freedom Arms 97. TheFA 97 is gone but the loads are still here
|
|
|
|
Post by bushog on Nov 2, 2017 18:22:48 GMT -5
Thank you. I originally loaded these for a Freedom Arms 97. TheFA 97 is gone but the loads are still here Bad reason to try to make something work.... Just my 2 cents. |
|
Fowler
.401 Bobcat
Posts: 3,559
|
Post by Fowler on Nov 2, 2017 20:48:15 GMT -5
Brian Pearce did a great article in Handloader magazine a few years back for that fun. He gave specific loads that were redlined for that gun in all weights. Sorry I don’t have a quick link for you.
|
|
