|
Post by snakereaper on Jul 25, 2017 16:28:16 GMT -5
Does anybody use the montana cast 400 gr lfn gc .in the 500 linebaugh for a hunting load for deer ,bear and hog around 1000 to 1100 fps. If so what powders are y'all use and starting loads.Ill be using a encore with 10 barrel.
|
|
|
Post by bigbrowndog on Jul 25, 2017 19:39:24 GMT -5
I use 16gr of HS6 in both a MBW 465gr and their 410gr, (actual weights,..they are advertised as 440gr and 400gr)with either bullet I get 1000-1080fps and very good accuracy.
I wouldnt hesitate to use them for 95-98% of my hunting, they are what consider my everyday loads.
Trapr
|
|
|
Post by todddoyka on Jul 25, 2017 20:32:45 GMT -5
i use MBW 465gr lfn gc and 16gr of hs-6 in my tc encore(23" MGM barrel). i use them for deer and black bear. i never tried a 400gr.
|
|
COR
.375 Atomic
Posts: 1,522
|
Post by COR on Jul 26, 2017 10:02:14 GMT -5
HS-6 and Titegroup as well as 2400 (16gr, 11.5gr,20gr respectively).
|
|
|
Post by snakereaper on Aug 1, 2017 23:46:11 GMT -5
so looks like best bet would be the hs-6 16 gr I'm guessing that is the top end load where would be a good start i g point with the hs 6.with 400 and up to 460 montana bullets.
|
|
|
Post by bigbrowndog on Aug 2, 2017 11:41:54 GMT -5
I'd start at 14.5-15grs, I don't know if 16grs is a top load??? It just gave me the velocity I was looking for, I pulled the load from some data provided by a forum member and have gone beyond 16grs with no signs of pressure........again, I was simply looking for 1000fps and an easy shooting/accurate load, so 16grs is where I landed.
Trapr
|
|