|
|
Post by snakereaper on Jul 12, 2017 14:48:05 GMT -5
I am having a 20 inch 500 linebough barrel built by Gary Reeder. this is a rookie question but never loaded a pistol ammo for a rifle . will the pistol loads be safe to use in the 20 in barrel. was trying to find some loads for montana 450 to 480 grain bullets in starline brass a cci 350 primers and h110 powder, and also some loads for some of the montana 535 grains with a differ powder. Thanks in advance for any info.
|
|
|
|
Post by Encore64 on Jul 12, 2017 14:57:11 GMT -5
Absolutely.. Load your ammo same as for a handgun. The joy of that Encore is lack of nose length issues.
Load and enjoy your gun.
|
|
|
|
Post by 2 Dogs on Jul 12, 2017 17:50:11 GMT -5
If you are worried about a pistol load sticking in your barrel test it on a paper target. No hole could be a problem,
|
|
|
|
Post by 500fksjr on Jul 12, 2017 18:59:21 GMT -5
I am having a 20 inch 500 linebough barrel built by Gary Reeder. this is a rookie question but never loaded a pistol ammo for a rifle . will the pistol loads be safe to use in the 20 in barrel. was trying to find some loads for montana 450 to 480 grain bullets in starline brass a cci 350 primers and h110 powder, and also some loads for some of the montana 535 grains with a differ powder. Thanks in advance for any info. 525/535 10 gr unique lp primer...450s 13/14 Hs 6 or for pure fun case full of trail boss... |
|
|
|
Post by whitebull on Jul 17, 2017 16:54:19 GMT -5
That would be one heck of a round in a lever gun!
|
|
|
|
Post by todddoyka on Jul 19, 2017 13:02:13 GMT -5
|
|
