m113a3
.240 Incinerator
Posts: 48
|
Post by m113a3 on Jul 2, 2017 19:35:40 GMT -5
Thanks for the advise and sharing your experience. I decided to start from scratch with the crimp and kept adjusting until the round would fit the chamber. Once I found the right crimp I set up another test so I would have 10 total rounds for my first test. **All rounds now chamber** Here is what the crimp looks like now using the Lee factory crimp - thoughts?
|
|
|
Post by magman on Jul 2, 2017 20:00:47 GMT -5
Looks good.
|
|
|
Post by nolongcolt on Jul 2, 2017 20:12:46 GMT -5
Looks like a factory round, glad its working out. Its a great old round that shoots well with good ammo and guns.
|
|
m113a3
.240 Incinerator
Posts: 48
|
Post by m113a3 on Jul 2, 2017 22:31:19 GMT -5
Thanks - I hope to test it out on the 5th since the range will be to crowded on the 4th. It my first load so i am starting at the min suggested by Lyman.
|
|
m113a3
.240 Incinerator
Posts: 48
|
Post by m113a3 on Jul 9, 2017 21:43:31 GMT -5
Well here are the results. Four rounds were not to bad and one flyer. I did seem to me that the recoil was a bit more than the magtech factory rounds. The target is 8 inches at 10 yards.
|
|