paulg
.375 Atomic
Posts: 2,420
|
Post by paulg on Mar 9, 2017 19:08:03 GMT -5
|
|
|
Post by BigBore44 on Mar 9, 2017 20:12:04 GMT -5
Purty nifty, Paul... Thanks for sharing it.
Ray
|
|
|
Post by stevewhr on Mar 9, 2017 21:32:54 GMT -5
Thank you Paul for the generous remarks. I'll add to this, if for some reason you are unhappy with the tool, return it. Include a note explaining why and I'll return your money. Simple. I believe in the tool and have used it on a Shiloh Sharps rifle, and on the other end a North American Arms little .22 Mag. Between there I used it on .380 Colt Pocketlite. The Colt gave me fits, I used the hammer and punch method and even after whacking the snot out it nothing ever moved. After I developed this tool, by leaning the gun against a fence post and then using the tool, viola. The rear sight moved over to where I needed it to go. Typically the gun needs no support like a vice or cradle. If you're out in the pasture like I was, you take advantage of what's available. As Paul suggested I have a Facebook page, Wyoming Sight Drifter. There are some pictures and more details, and you should find my contact info. Or you can reach me at 307-421-2127. Hope you folks have a good evening.
|
|
erich
.30 Stingray
Posts: 393
|
Post by erich on Mar 10, 2017 20:52:00 GMT -5
Neat!
Sent from my VS980 4G using proboards
|
|