princeout
.375 Atomic
Enter your message here...
Posts: 2,001
|
Post by princeout on Dec 30, 2016 22:34:38 GMT -5
Progun, That "fill it to the bottom of the bullet" recipe is great for TrailBoss. Don't know about H-110 used that way. Tim
|
|
Snyd
.375 Atomic
The Last Frontier
Posts: 2,388
|
Post by Snyd on Dec 31, 2016 10:34:59 GMT -5
Progun, That "fill it to the bottom of the bullet" recipe is great for TrailBoss. Don't know about H-110 used that way. Tim In the 45 Colt and 454 this holds true.
|
|
princeout
.375 Atomic
Enter your message here...
Posts: 2,001
|
Post by princeout on Dec 31, 2016 14:56:35 GMT -5
Progun, That "fill it to the bottom of the bullet" recipe is great for TrailBoss. Don't know about H-110 used that way. Tim In the 45 Colt and 454 this holds true. Good to know. I'll have to do some measuring next time I load H-110 in 45 and in 500. Tim
|
|
|
Post by bigbrowndog on Jan 1, 2017 15:31:10 GMT -5
One of my loads for a 515gr with H110 is 26grs, pushes at 1030fps from a 5.5" barrel. That load is shot in 500max revo, but with normal 500 Linebaugh brass loaded to normal Linebaugh OAL specs.
It's the load I intend on using in my 4" gun once it's finished.
Trapr
PS- a member called TEXASFIVEGUN, posted a thread on 500 Linebaugh load data, a while back, I have it bookmarked for my reference.
|
|
dmize
.401 Bobcat
Posts: 2,825
|
Post by dmize on Jan 1, 2017 22:36:04 GMT -5
The problem with the 500 Linebaugh and published data is the really heavy bullets. Hodgdon publishes data up to the mid 400's. Above that research and look at Lee and Taffins loads. In my 500JRH,500 Linebaugh and 500 Linebaugh Max H110 gets really friggin nasty at the top end and there are other powders that get almost as much velocity with much less abuse.
|
|
Snyd
.375 Atomic
The Last Frontier
Posts: 2,388
|
Post by Snyd on Jan 2, 2017 3:43:09 GMT -5
The problem with the 500 Linebaugh and published data is the really heavy bullets. Hodgdon publishes data up to the mid 400's. Above that research and look at Lee and Taffins loads. In my 500JRH,500 Linebaugh and 500 Linebaugh Max H110 gets really friggin nasty at the top end and there are other powders that get almost as much velocity with much less abuse. Ya, the only published data I've been able to find for a 525gr is from Accurate Powders. They list loads for 520gr, 525gr WFN and LFN in both the 500L and 500 Max. www.accuratepowder.com/wp-content/uploads/2010/09/WP_LoadSpec_1-23-14.pdf
|
|
|
Post by 500fksjr on Jan 2, 2017 8:22:49 GMT -5
Thanks Guys I will go back an try some H4227...Been using Unigue an 10 grains...tried 5744 its ok not very accurate
|
|