|
Post by 2 Dogs on Oct 15, 2015 20:18:10 GMT -5
I need to lay hands on some Hornady 257 60 grain flat point bullets. It seems that Hornady has temporarily discontinued this particular product. I ordered a Lyman 257420 mold, but I don't have enough Hornady 60 grain flat points to finish up my testing for Taffin's new book. So, I was wondering if any of you guys had any you could sell me, even partial boxes. Or, perhaps you guys might check your local gunshops and see if there were any available. The Hornady product number is 2510.
Thanks guys.
|
|
|
Post by Encore64 on Oct 15, 2015 20:26:12 GMT -5
PM Sent
|
|
|
Post by 2 Dogs on Oct 15, 2015 20:33:11 GMT -5
Still looking....
|
|
|
Post by Encore64 on Oct 15, 2015 20:42:45 GMT -5
Yeah, didn't have anywhere near that amount.
Sorry didn't have more. Nearly impossible to find the 25 caliber flat point bullets.
|
|
|
Post by dougader on Oct 15, 2015 21:20:19 GMT -5
There's a box on gunbroker. I bid 24.95 and was unsuccessful. How bad do you need these?
|
|
|
Post by boatswainsmate on Oct 15, 2015 21:27:56 GMT -5
|
|
|
Post by 2 Dogs on Oct 15, 2015 21:51:35 GMT -5
There's a box on gunbroker. I bid 24.95 and was unsuccessful. How bad do you need these? Somebody wants that particular box pretty bad... They shouldn't be more than 20-25 bucks a box...
|
|
|
Post by 2 Dogs on Oct 15, 2015 21:54:13 GMT -5
I have a Lyman 257420 mold on the way.
|
|
jsh
.327 Meteor
Posts: 884
|
Post by jsh on Oct 16, 2015 6:23:09 GMT -5
Pm sent. I found them and they are 87 grain FN with two canulures. I have some 25 GC's some place if you need any. I will keep looking. Jeff
|
|
|
Post by contender on Oct 16, 2015 9:29:52 GMT -5
Fermin, I have some of those bullets you need. I'll send you some. I got them for my Hawkeye. PM to follow.
|
|
|
Post by 2 Dogs on Oct 16, 2015 10:45:46 GMT -5
Thanks Tyrone.
Guys please help me out. I want to prove this concept with the Hornady 60 grain bullet...
|
|
|
Post by magnumwheelman on Oct 16, 2015 11:40:10 GMT -5
DOGS... I have some 60 grain cast flat points from Western Casting that I load in my 257 Special... have several 100 here if those would help you out??? ( pictures are in my Wildcats thread ) oops... after checking those are 65 grain bullets... sorry
|
|
|
Post by 2 Dogs on Oct 16, 2015 12:55:20 GMT -5
They would but save your time as I already have the 65 grain Lyman mold on the way and I will be casting them within the week.
Thanks for your consideration.
|
|
ericp
.327 Meteor
Posts: 506
|
Post by ericp on Oct 16, 2015 14:09:35 GMT -5
They're really scarce at the moment. I've been looking for some for over a year without any luck aside from the occasional Gunbroker auction which goes way too high. Good luck with the search, if I can find any they'll be headed your way.
Eric
|
|
|
Post by 2 Dogs on Oct 16, 2015 21:59:25 GMT -5
Thanks Eric, I appreciate it.
|
|