|
Post by Robster on Aug 22, 2015 8:11:49 GMT -5
Picked up a couple new guns. Need some parts for them. First off, I am looking for a steel gripframe for a NM Single Six, blued. Also Looking for a steel gripframe for a NM Blackhawk in .45, also blued. Looking for a 2 SBH hammers, also blued. One for the NM .45, and one that can be broken as I only want the thumb spur to have Alan Harton weld onto my SS hammer. Lastly I need some grips for a SBH. Would like the original style wood by Ruger. Do not have to be pristine, just not broken. Let me know what you have or point me in the right direction. Any help is appreciated. Thanks Wood grips are for this one: Single six that needs SBH thumb spur and steel grip frame. .45 Blackhawk that needs SBH hammer and steel grip frame.
|
|
|
Post by arokcrwlr on Aug 22, 2015 10:10:19 GMT -5
|
|
|
Post by Robster on Aug 22, 2015 10:32:51 GMT -5
OK, I am confused. If either or both fit my guns, I will take them pending price. I looked at the grip frames and the Single Six is stamped XRN-3RED. The .45 gripframe is NXR3-RED
If someone can confirm that they will fit, shoot me a price and we will see where were at. Thanks for offering them up. Rob
|
|
|
Post by arokcrwlr on Aug 22, 2015 10:40:14 GMT -5
These came off of older large frame Vaqueros. I believe they will work, but somebody smarter than me will have to verify. $200 + $5.95 USPS flat rate shipping.
|
|
|
Post by Robster on Aug 22, 2015 10:56:46 GMT -5
Ok, thanks. That's for both? Just waiting on verification. Rob
|
|
|
Post by kings6 on Aug 22, 2015 11:15:04 GMT -5
Rob, a guy on the RF has one Montado hammer left. Same as SBH just with different checkering.
|
|
|
Post by Robster on Aug 22, 2015 11:50:43 GMT -5
Thanks, I saw that but they are stainless and I am looking for the blued version.
|
|
|
Post by arokcrwlr on Aug 22, 2015 13:09:58 GMT -5
Yes Rob, that is for both.
|
|
|
Post by Robster on Aug 23, 2015 9:25:01 GMT -5
Thank. I'll do research tomorrow and let you know. If they work,I'll pm you for payment info.
|
|