|
Post by oregon45 on Aug 10, 2015 18:57:41 GMT -5
Edited to add: Only the N-frame rear sight is left Because I'm buying a Lipsey's 480 and a 10.5" .357 Max in the next few months, I won't get around to using these parts anytime soon. So I figured I'd send them along to those who need'em for their projects. 3. N-frame rear sight assembly, complete. White outline rear sight, square end sight leaf, with all the parts and mounting screws: $35 shipped. ****** 1. N-frame hammer assembly, complete. Case hardened, wide target hammer spur, hammer mounted firing pin. In good condition with usual wear in the case-hardening on the sides of the hammer. $35 shipped. 2. N-frame trigger assembly, complete. Case hardened, wide target serrated trigger face. Same condition as the hammer (I believe they came from the same gun). $35 shipped. Buy both hammer and trigger for $60 shipped. ***** Hammer and Trigger are Sold ***** ******* S&W Model 29 8 3/8" barrel, blue with red ramp sight. Very nice bore, some marks in the bluing and a ding on one side as can be seen. Ready to be worked over and fitted to a Ruger frame, or be cut down and bolted to a 'Smith frame, depending on your project. ***** Sold ***** S&W M29 cylinder, 44 Magnum, with crane assembly. Non-recessed case heads. This would make a great cylinder to be re-chambered to tight-45 Colt and fitted to a Model 25. There is some pitting, as can be seen, but that would likely clean up with some stoning. Cylinder is pretty nice otherwise with only minimal bluing wear. ***** Sold ***** Buy both for $170 shipped.
|
|
jdoc
.327 Meteor
Posts: 727
|
Post by jdoc on Aug 10, 2015 20:17:22 GMT -5
I will take the barrel.
|
|
|
Post by oregon45 on Aug 10, 2015 20:18:13 GMT -5
It's yours. Cylinder still available.
|
|
|
Post by oregon45 on Aug 10, 2015 21:53:05 GMT -5
Cylinder is sold.
|
|
|
Post by oregon45 on Aug 11, 2015 9:41:26 GMT -5
New parts added!
Update: Only the N-frame rear sight assembly is left.
|
|
|
Post by oregon45 on Aug 11, 2015 20:27:51 GMT -5
|
|
|
Post by Doc Barranti on Aug 11, 2015 20:50:25 GMT -5
I'll take the n frame hammer and trigger for $60....
PM on the way...
|
|
|
Post by oregon45 on Aug 11, 2015 20:50:55 GMT -5
Thanks Mike, they're yours.
|
|
Aggie01
.375 Atomic
max
Posts: 1,772
|
Post by Aggie01 on Aug 11, 2015 21:43:21 GMT -5
I'll take the sight.
|
|
|
Post by oregon45 on Aug 11, 2015 21:51:40 GMT -5
Thanks, sight is sold!
|
|