Post by Fowler on May 25, 2015 22:00:23 GMT -5
Ok so I have had a lot of guys asking about my doing another run of AR500 plate gongs. These are precision laser cut gongs that will last years, I am on my original set that I made 6 or 7 years ago and other than the thick layer of paint that has built up on them they look like they did the day we cut them out of the sheet.
Now I will offer a menu below and you select what you want and we will ship it to you the cheapest way possible, US mail for most of the 12" or less targets and UPS for the rest. We will charge just actual shipping cost for all orders.
Now in the picture above you will also see what we call our sawbuck target stand, it breaks down or sets up in roughly a minute and can be set up nearly anywhere, you dont have to have flat, level, or even ground as the legs are independant on each end and will hold over 300 pounds easily. In testing we have hit 12" plates hard enough to swing the plates out behind the rack parallel to the ground without the racks falling over. The rack is offered as a kit that will include the end plates and hooks for one stand and 2 targets only, you add the square legs and #6 Rebar crossbar steel or they can be purchased complete and shipped UPS.
1/2" AR500 plate is what all of these target will be made from, I have made some from 3/8" plate but the 1/2" seems to hold up much better over time and settles quicker between shots.
4" square or round $17.50
6" square or round $25.00
8" square or round $35.00
10" square or round $50.00
12" Square or round $75.00
16" square or round $125.00
24" square or round $180.00
30" square or round $400.00
36" square or round $585.00
12"x18" rectangle $100.00
IPSC International Clam Shell target $180.00
USPSA full sized silhouette $225.00
USPSA 50% sized target $65.00
Complete sawbuck (less the targets and chains) $125.00
Sawbuck kit $30.00
Chain and bolt kit (per target) $15.00
If you buy a complete sawbuck and targets totalling over $250.00 I will include the chain and bolt kits for free
I will let this run until I have enough target orders for the first sheet and then we will ship and cut the plate, then build up orders again for sheet number 2 so on and so forth.
Please let me know if have any questions
Bill Fowler
Wesco Laser Machining
303-765-5916
720-308-8005
bfowler@wescolaser.com
Now if you will be at the June Holiday I can deliver your targets with me for free,
Now I will offer a menu below and you select what you want and we will ship it to you the cheapest way possible, US mail for most of the 12" or less targets and UPS for the rest. We will charge just actual shipping cost for all orders.
Now in the picture above you will also see what we call our sawbuck target stand, it breaks down or sets up in roughly a minute and can be set up nearly anywhere, you dont have to have flat, level, or even ground as the legs are independant on each end and will hold over 300 pounds easily. In testing we have hit 12" plates hard enough to swing the plates out behind the rack parallel to the ground without the racks falling over. The rack is offered as a kit that will include the end plates and hooks for one stand and 2 targets only, you add the square legs and #6 Rebar crossbar steel or they can be purchased complete and shipped UPS.
1/2" AR500 plate is what all of these target will be made from, I have made some from 3/8" plate but the 1/2" seems to hold up much better over time and settles quicker between shots.
4" square or round $17.50
6" square or round $25.00
8" square or round $35.00
10" square or round $50.00
12" Square or round $75.00
16" square or round $125.00
24" square or round $180.00
30" square or round $400.00
36" square or round $585.00
12"x18" rectangle $100.00
IPSC International Clam Shell target $180.00
USPSA full sized silhouette $225.00
USPSA 50% sized target $65.00
Complete sawbuck (less the targets and chains) $125.00
Sawbuck kit $30.00
Chain and bolt kit (per target) $15.00
If you buy a complete sawbuck and targets totalling over $250.00 I will include the chain and bolt kits for free
I will let this run until I have enough target orders for the first sheet and then we will ship and cut the plate, then build up orders again for sheet number 2 so on and so forth.
Please let me know if have any questions
Bill Fowler
Wesco Laser Machining
303-765-5916
720-308-8005
bfowler@wescolaser.com
Now if you will be at the June Holiday I can deliver your targets with me for free,
