|
Post by 500fksjr on Feb 15, 2012 23:15:06 GMT -5
Dug out my notes and some brass and bullets and here's the load from the picture at the top. I measured a Mt Baldy 450gr Keith and the portion below the crimp grove was .475". My brass (Starline and Buffalo Bore) are trimmed to about 1.395". If I fill with Trail Boss, leaving 0.475" from the top of the powder to the lip, it takes between 9.9 and 10 grains of TB. This could vary with the brand of brass and your trim to length. Hope this helps. Tim Got some loaded and I am now waiting on some sun or atleast no snow or rain to get out and shoot some test loads...Than turn mamma loose ;D Thanks
|
|
|
Post by 500fksjr on Feb 21, 2012 12:23:24 GMT -5
Well got to the range the loads worked well I have a PPM ( Pistol Packing Mamma ) smile goes here...Thanks for the help...
|
|