|
|
Post by AxeHandle on Apr 9, 2011 6:56:39 GMT -5
People run hot and cold about lots of the top drawer gunsmiths. Doesn't take much to get cross ways with one. I find that one of the characteristics that makes the best gunsmiths is a strong belief is what they build. As a result they don't take questioning their opinions well. That said I find Ed Brown easy to talk to. Personally been exposed to negative experiences with Baer. They both get rave reviews everywhere you go. Every Brown and Baer product I have ever handled were well done. I'd not pass up a good deal on either one..
|
|
rWt
.375 Atomic
Posts: 1,568
|
Post by rWt on Apr 30, 2011 16:40:20 GMT -5
Any experience with the S&W version? Remington's?
Or, what's the take on the new Ruger?
Are MIM parts undesireable? Are they replaceable?
|
|
|
|
Post by Mountaineer on May 2, 2011 12:27:17 GMT -5
I looked at the new Ruger in Pittsburgh last week. It looks very well made. Sig has some new offerings as well. I was particularly struck by their 1911 Scorpion: having all the features of a stainless Springfield TRP (look it up on the Sig web site). Don't know what they'll sell for, but I expect they'll be in the TRP range, or more. The just-introduced Remington R1 Enhanced version looks good, keeping in mind that it's a Series 80 action. Like the Ruger, the Remington is priced very reasonably.
I tell you what, though (and this is going to sound blasphemous), but the Phillipine made American Tactical Import 1911s look very good for the money. I've read the reviews on them, and they're generally quite favorable. Their top of the line ATI FX Thunderbolt, for instance, comes with a railed frame, checkered front strap, adjustable sights, magwell and all the other bells and whistles with an MSRP under $700. I might give one of those a hard look if I were in the market for another 1911...
|
|
jeep
.240 Incinerator
Posts: 35
|
Post by jeep on Jul 15, 2011 11:54:10 GMT -5
I like a boxstock 1911 Colt brand . The one I use is the 1918 Colt Army model.
|
|
DR505
.240 Incinerator
Posts: 15 
|
Post by DR505 on Jul 23, 2011 13:00:55 GMT -5
I've got a bunch, but here are two of my favorites:  The one on the left is a Wilson CQB...significantly in excess of $1,500.00 unless you can find one used and you get lucky. The one on the right is a Kimber Warrior...no firing pin safety! They are both great pistols. The CQB has the edge on fit, finish, and accuracy (it better at the cost), but they have both been utterly reliable with all types of ammo. The CQB has many more rounds through it, so I can't compare durability yet. |
|
|
|
Post by AxeHandle on Jul 29, 2011 8:33:15 GMT -5
Had my first Wilson gun built in the early 80s. Those guys turn out some fine stuff. I hate that they are so expensive these days.
Stopped in at my local emporium last Wednesday. Looked at a danged nice Nighthawk, a Kimber or two, and some Marvel customs. The Kimber was a full size alloy frame with no firing pin block and no guide rod. Just like I like them! The 1911 prices are killing me! I'm buying FAs and Custom Rugers for less money..
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 16, 2011 23:56:34 GMT -5
If it were me I would look no further than Les Baer or the new Dan Wesson Valor, oh ya that is all I would have, come to think of it, I sold or traded all the rest!! These are in my opinion the best buy's on the planet!!
|
|
|
|
Post by arokcrwlr on Nov 28, 2011 11:13:33 GMT -5
I'm late to this thread, but I have to throw my vote to DW. I have a Valor and a CCO currently and I have had two other DW's. They represent a huge value for the money and are like a well kept secret. They use no MIM parts and are all hand fitted and as close to custom as a factory gun can get. I would put DW on par with a Baer if you put them side by side and compared the quality of parts and fitting. They only build a few thousand guns per year as opposed to the tens of thousands that Kimber and Springfield build.
Having said that I also own a couple of Springfields and Colts and like them as well (Colt more for nostalgia than anything), but my DW's reek of quality right out of the box for a little less than a comparable Baer/Fusion/etc.
|
|
|
|
Post by doghawg on Dec 5, 2011 18:32:47 GMT -5
Local dealer got one of these in stock. I did NOT plan to spend this much money but the sales guy was GOOD at his job. My first 1911 and maybe the only one I'll need.....well....maybe there should be a 4 1/4" bobtail... www.lesbaer.com/1911UltTact.html |
|
|
|
Post by steveb on Dec 6, 2011 10:01:46 GMT -5
From what I've seen at courses and shoots, and heard from those I consider knowledgeable, I'd look at S&W and Springfields, and avoid Kimber and Wilson. This is not Gosple, just add into other opinions. YMMV.. I wouls also check out the Ruger. steve b
|
|
|
|
Post by crazyhorse on Dec 6, 2011 18:31:37 GMT -5
Say you wanted to spend just under $1500 for a 1911 which would you go with. I'm looking at either a higher end Springfield, Kimber, Colt Gold Cup, or Dan Wesson. Familiar with the first three but not DW. Any other suggestions? Thanks. I have all 4 of the ones you mentioned. I like every one of them but I think if I had to pick one it would be my Springfield Trophy Match. |
|
raven5
.240 Incinerator
Posts: 73
|
Post by raven5 on Dec 19, 2011 23:10:35 GMT -5
I'm late to this thread, but I have to throw my vote to DW. I have a Valor and a CCO currently and I have had two other DW's. They represent a huge value for the money and are like a well kept secret. They use no MIM parts and are all hand fitted and as close to custom as a factory gun can get. I would put DW on par with a Baer if you put them side by side and compared the quality of parts and fitting. They only build a few thousand guns per year as opposed to the tens of thousands that Kimber and Springfield build. Having said that I also own a couple of Springfields and Colts and like them as well (Colt more for nostalgia than anything), but my DW's reek of quality right out of the box for a little less than a comparable Baer/Fusion/etc. I have a Valor and couldn't agree more. Pure quality and sex appeal. Everything you need where it counts, but nothing extra really. Not saying it isn't really nice, but if you want maybe a few more of the finishing touches (i.e. French border, perfectly polished slide flats with deep bluing etc.) then either have them done or look at a different model of 1911 out there. I won't knock ya for doing it either. ;D To each his own. But for pure functionality and quality, you won't beat a Dan Wesson right now. They've really came a long way. And American made to boot!!! Woo Hoo!!!!!! |
|
|
|
Post by sixshooter on Dec 20, 2011 22:19:30 GMT -5
Why not save $900 and get Remington's new 1911? I've heard nothing but good things about them.
|
|
