|
|
Post by foxtrapper on Jul 3, 2024 13:15:39 GMT -5
H110, aa#9, 4227 tried so far. Powder coat and gas checked. Getting frustrated!😣
|
|
|
|
Post by 45MAN on Jul 3, 2024 13:42:13 GMT -5
CALIBER/CARTRIDGE/GUN?
|
|
|
|
Post by foxtrapper on Jul 3, 2024 15:22:19 GMT -5
41 mag FA 2008. Gun shoots the Hornady 210xtp with great accuracy!
|
|
|
|
Post by Encore64 on Jul 3, 2024 17:00:24 GMT -5
Slow those bullets down. Try a modest load of Unique or similar powder.
|
|
pleadthe2nd
.327 Meteor
Enter your message here...
Posts: 952
|
Post by pleadthe2nd on Jul 3, 2024 17:56:15 GMT -5
I agree with encore64, try some HS6
|
|
|
|
Post by bearskinner on Jul 3, 2024 19:02:30 GMT -5
Or step it up to the 260 grain Miha mold. Those shoot like a laser beam, slow or fast, in my 83.
|
|
|
|
Post by bushog on Jul 3, 2024 19:16:42 GMT -5
Or step it up to the 260 grain Miha mold. Those shoot like a laser beam, slow or fast, in my 83. Which 260gr mold? There are several combinations…. The Tru-shot? What are the numbers on the mold |
|
freeze
.30 Stingray
Posts: 100 
|
Post by freeze on Jul 3, 2024 20:24:56 GMT -5
Not the 41 caliber version but I have the 44 caliber "hammer" and I can't get it to shoot well at the velocity I want.
I'd like to get 950 to 100 fps .... But it seems to fall apart for me at 850 and doesn't get better.
I think the design might not be fitting for higher velocity, but what do I know.
I'm sure someone has had success with them at high velocity, but it isn't me!
I much prefer the xxx-640 series of molds from MP Molds. They shoot well for me across a wide velocity rage.
-Freeze
|
|
|
|
Post by bearskinner on Jul 3, 2024 20:30:03 GMT -5
 I’ll pull the mold in the morning, and get numbers and pics. Here’s the (255-265 grain) 260 grain powder coated gas checked cup points. |
|
cmillard
.375 Atomic
MOLON LABE
Posts: 1,997
|
Post by cmillard on Jul 3, 2024 22:26:49 GMT -5
Give some Longshot a try too, I'd say start around 8 grains and work up from there
|
|
|
|
Post by bushog on Jul 3, 2024 22:56:55 GMT -5
View AttachmentI’ll pull the mold in the morning, and get numbers and pics. Here’s the (255-265 grain) 260 grain powder coated gas checked cup points. That’s the tru-shot mold…. |
|
|
|
Post by sixshot on Jul 4, 2024 1:12:34 GMT -5
What size are your bullets? Do you have any other cast bullets that are a problem?
Dick
|
|
|
|
Post by foxtrapper on Jul 4, 2024 5:13:02 GMT -5
What size are your bullets? Do you have any other cast bullets that are a problem? Dick push through Lee sizer @ .410. That’s the only cast bullet I’ve tried. I just have the one mold in 41 |
|
|
|
Post by foxtrapper on Jul 4, 2024 5:14:14 GMT -5
View AttachmentI’ll pull the mold in the morning, and get numbers and pics. Here’s the (255-265 grain) 260 grain powder coated gas checked cup points. That’s the same pin I’m using in the 220 |
|
|
|
Post by foxtrapper on Jul 4, 2024 5:17:47 GMT -5
I do have, longshot,unique and HS-6.
|
|
