|
Post by NathanHale on Sept 21, 2021 12:41:24 GMT -5
I neglected to turn the base pin retention screw. Went to seat the ball, didnt notice the base pin had shifted forward and bent. I have straightened it out almost straight but it will not seat completely in the frame. Does anyone have a pin in a random drawer? It is a 7.5” I called a few places and no-one has it. As well as looking on ebay with my cursory search. Thought this would be the most effective place to find it John
|
|
|
Post by Encore64 on Sept 21, 2021 12:51:16 GMT -5
I neglected to turn the base pin retention screw. Went to seat the ball, didnt notice the base pin had shifted forward and bent. I have straightened it out almost straight but it will not seat completely in the frame. Does anyone have a pin in a random drawer? It is a 7.5” I called a few places and no-one has it. As well as looking on ebay with my cursory search. Thought this would be the most effective place to find it John Look on Belt Mountain's Site. Nobody makes better pins than Kelye...
|
|
|
Post by NathanHale on Sept 21, 2021 13:27:10 GMT -5
Thank you. Just contacted them. Hopefully theyll have it John
|
|
|
Post by headspace on Dec 15, 2021 15:22:19 GMT -5
Did they have it, John? Guessing they did, or you found one somewhere else since we haven't heard any more about this.
|
|
kelye
.30 Stingray
www.beltmountain.com
Posts: 349
|
Post by kelye on Dec 15, 2021 20:52:49 GMT -5
I made a few, to work with the loading lever made it a difficult part to make. I have the quick change kits available, handy when using conversion cylinders.
|
|