aciera
.375 Atomic
Posts: 2,070
|
Post by aciera on Aug 16, 2021 23:36:09 GMT -5
Anyone does this? Not had much luck finding any info. Have a couple of mine I want to rebarrel and rechamber...... Thanks.
|
|
|
Post by flyingzebra on Aug 17, 2021 8:26:54 GMT -5
Jack Huntington
|
|
Kurt
.30 Stingray
The .44 Special is special!!!
Posts: 124
|
Post by Kurt on Aug 17, 2021 10:45:14 GMT -5
Plug the breech end. Put an allen wrench in the barrel then pour it full of Cerrosafe. Hold the frame in fitted blocks. Put pipe over allen wrench and unscrew.
|
|
Kurt
.30 Stingray
The .44 Special is special!!!
Posts: 124
|
Post by Kurt on Aug 17, 2021 10:47:13 GMT -5
Plug the breech end. Put an allen wrench in the barrel then pour it full of Cerrosafe. Hold the frame in fitted blocks. Put pipe over allen wrench and unscrew.
|
|
aciera
.375 Atomic
Posts: 2,070
|
Post by aciera on Aug 17, 2021 18:17:51 GMT -5
Thanks but I’m going to do it with them next month while working with a smith. It’s double action and I am a single action parts maker.
|
|
aciera
.375 Atomic
Posts: 2,070
|
Post by aciera on Aug 17, 2021 18:19:05 GMT -5
Plug the breech end. Put an allen wrench in the barrel then pour it full of Cerrosafe. Hold the frame in fitted blocks. Put pipe over allen wrench and unscrew. Sounds like a plan. I thank you. Have a Smith 329&69 that want to be 45 Colt very badly.......
|
|
|
Post by lockhart on Sept 19, 2021 14:49:17 GMT -5
Which way? Are they right hand or left hand thread?
|
|
aciera
.375 Atomic
Posts: 2,070
|
Post by aciera on Sept 19, 2021 19:00:54 GMT -5
Don’t know......most are right hand.........good question
|
|
aciera
.375 Atomic
Posts: 2,070
|
Post by aciera on Oct 28, 2021 16:54:41 GMT -5
Plug the breech end. Put an allen wrench in the barrel then pour it full of Cerrosafe. Hold the frame in fitted blocks. Put pipe over allen wrench and unscrew. Worked like a charm
|
|
|
Post by squawberryman on Nov 1, 2021 18:20:41 GMT -5
A picture of that would have been neat
|
|
|
Post by x101airborne on Nov 2, 2021 7:36:28 GMT -5
A picture of that would have been neat Yessir, I agree!
|
|
aciera
.375 Atomic
Posts: 2,070
|
Post by aciera on Nov 3, 2021 18:29:45 GMT -5
A picture of that would have been neat On the road back home now. Will do a series of pictures when I get back. Probably this weekend.
|
|
|
Post by cddogfan1 on Nov 11, 2021 10:46:39 GMT -5
Plug the breech end. Put an allen wrench in the barrel then pour it full of Cerrosafe. Hold the frame in fitted blocks. Put pipe over allen wrench and unscrew. Sounds like a plan. I thank you. Have a Smith 329&69 that want to be 45 Colt very badly....... So did they turn into 45s. ?
|
|
aciera
.375 Atomic
Posts: 2,070
|
Post by aciera on Nov 11, 2021 11:26:17 GMT -5
Sounds like a plan. I thank you. Have a Smith 329&69 that want to be 45 Colt very badly....... So did they turn into 45s. ? All the details worked out. Just a lil fussy. Didn’t get in my reamer. But bored the throats. And turned the barrel. Chipped an insert on last pass. Die coming in. Then just trim to length. And screw back in.
|
|