|
|
Post by flyingzebra on Jul 30, 2021 18:21:43 GMT -5
When you've got the second key to the candy store... I'm a seriously fortunate fellow |
|
|
|
Post by flyingzebra on Jul 30, 2021 18:24:44 GMT -5
Did any work need to go into the loading gate area to accommodate the 10mm or does she squeeze in there? It needed additional clearance at the gate. Fortunately I didn't have to weld this one. Sometimes they need material added at the transfer bar cut. |
|
|
|
Post by leadhound on Jul 30, 2021 18:41:22 GMT -5
Did any work need to go into the loading gate area to accommodate the 10mm or does she squeeze in there? It needed additional clearance at the gate. Fortunately I didn't have to weld this one. Sometimes they need material added at the transfer bar cut. Is there a way to check or a measurement we could take before operating? Or is it exploratory surgery? |
|
|
|
Post by flyingzebra on Jul 30, 2021 19:52:11 GMT -5
Sometimes they need material added at the transfer bar cut. Is there a way to check or a measurement we could take before operating? Are you asking about the transfer bar cut? There's always a way - but we don't bother. It does or doesn't end up needing re-work once there's clearance. If it needs to get welded and worked that's what we do. |
|
|
|
Post by leadhound on Jul 30, 2021 20:51:11 GMT -5
Is there a way to check or a measurement we could take before operating? Are you asking about the transfer bar cut? There's always a way - but we don't bother. It does or doesn't end up needing re-work once there's clearance. If it needs to get welded and worked that's what we do. Yep, that's what I meant, good deal, I like that way of thinkin. |
|
Ramar
.30 Stingray
Posts: 440
|
Post by Ramar on Aug 2, 2021 19:30:42 GMT -5
Slick little beauty. Must be a pleasure to carry!
|
|
rhino
.30 Stingray
Posts: 213
|
Post by rhino on Aug 23, 2021 20:56:28 GMT -5
That looks sharp, awesome work! Mr. Peterson builds really nice grips/stocks also, I have a set on my SBH and they are nice.
|
|
|
|
Post by junebug on Aug 24, 2021 20:05:17 GMT -5
This is what happens, when you turn a talented man loose, with a hand full of parts, in a room full of tools. SWEET!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
|
