kooz
.327 Meteor
Posts: 616
|
Post by kooz on May 22, 2021 15:54:36 GMT -5
I am looking for a holster for my 2 3/4" .44mag l-frame smith and can't hardly find anything that is in stock out there . Looking for an OWB paddle , kydex preferebly , but leather could work . Any suggestions ? Thanks
Kooz
|
|
|
Post by bigbrowndog on May 22, 2021 16:08:56 GMT -5
I had good results with a holster meant for a Kframe Smith, but it was leather, so a bit of stretch is available compared with kydex.
Trapr
|
|
|
Post by dougader on May 22, 2021 16:45:28 GMT -5
Same here. I had an old K frame molded leather hoslter and the 69 fits in great.
|
|
kooz
.327 Meteor
Posts: 616
|
Post by kooz on May 22, 2021 18:29:43 GMT -5
Thanks, I'll give it a try
|
|
|
Post by paul105 on May 22, 2021 19:26:30 GMT -5
|
|
|
Post by richard on May 22, 2021 21:23:55 GMT -5
JM Custom made a kydex holster for my 3” GP-100 that works quite well, but I’m not sure if he does paddles. www.jmcustomkydex.com/
|
|
StanleyWhite
.30 Stingray
Former Marine and still working for the man.
Posts: 147
|
Post by StanleyWhite on May 23, 2021 7:36:45 GMT -5
|
|
Fowler
.401 Bobcat
Posts: 3,546
|
Post by Fowler on May 23, 2021 8:41:36 GMT -5
I still like Simply Rugged Alaskan Sour Dough holster for a paddle holster. Carrier my 2 1/2” S&W 19 in one for years, in the waist band, outside on the belt, spreads the weight of the gun around. Never had the gun move unless I wanted it to. Oh the leather won’t screw up the finish nearly a quick as plastic/kydex will…
YMMV
|
|
kooz
.327 Meteor
Posts: 616
|
Post by kooz on May 23, 2021 21:00:18 GMT -5
Thanks, I ordered this one from midway and will give it a try .
|
|
|
Post by ddixie884 on May 24, 2021 3:04:59 GMT -5
Let us know..........
|
|
aciera
.375 Atomic
Posts: 1,969
|
Post by aciera on May 27, 2021 23:21:42 GMT -5
Been looking for a Model 69 .......then I’ll need a holster
|
|
groo
.327 Meteor
I yet live!!!!
Posts: 855
|
Post by groo on Jul 2, 2021 17:19:51 GMT -5
Groo here Lobo made mine......
|
|
|
Post by warhawk on Jul 11, 2021 6:17:30 GMT -5
I have an old Bianchi 111 Cyclone for a 2 1/2 inch K frame. It fits my short barrel M69 perfectly.
|
|
|
Post by potatojudge on Jul 11, 2021 9:00:29 GMT -5
I'm not sure, but I think the Bianchi Hip Hugger came in a short K frame model that might work I went with a vintage Northern Plains holster because it allowed for the Trijicon
|
|
|
Post by ddixie884 on Jul 21, 2021 21:21:33 GMT -5
I have an old Bianchi 111 Cyclone for a 2 1/2 inch K frame. It fits my short barrel M69 perfectly. I have 3 of them and they fit my 696 and my Clements .41spl 686.
|
|