|
Post by flyingzebra on Apr 17, 2021 17:08:23 GMT -5
Looking for a Remington bolt for 700 small action, I'll be running 17 Remington so the 223 case size face size is what I'm needing
Thanks
|
|
|
Post by magnumwheelman on Apr 17, 2021 22:01:32 GMT -5
I may have one... pretty sure I do, as I changed over a 17 Remington with an eroded chamber throat to a 6.8 SPC
|
|
|
Post by flyingzebra on Apr 17, 2021 23:09:36 GMT -5
Cool
I'll stand by to stand by
|
|
|
Post by magnumwheelman on Apr 18, 2021 18:12:46 GMT -5
Turns out I have a decent jeweled Remington 700 bolt... but it’s from a 22-250... so if anyone needs one... Zebra still needs a 223 /17 Remington bolt
|
|
|
Post by flyingzebra on Apr 18, 2021 21:50:50 GMT -5
If I don't find anything in the next few days I'll take that bolt and sleeve it, disc set the firing pin hole for the small diameter pin, and cut it for the Sako extractor.
Would likely end up fitting a light firing pin too. Cutting Edge Bullets makes a titanium firing pin that doesn't cost an arm and a leg.
Always something...
|
|