|
Post by squawberryman on Mar 10, 2021 9:31:03 GMT -5
Pastor gave these to me. Buffalo website says I'm good for Florida moose
|
|
Fowler
.401 Bobcat
Posts: 3,557
|
Post by Fowler on Mar 10, 2021 10:46:09 GMT -5
That Buffalo Bore load is a really good one, I have a similar load I sorted out with 170gr Nolser Partitions.
|
|
|
Post by x101airborne on Mar 10, 2021 15:10:49 GMT -5
Niice!
|
|
|
Post by squawberryman on Mar 10, 2021 19:47:29 GMT -5
Just read an old thread on H322 powder with a guy not using it because it was 26 dollars a pound
|
|
|
Post by medicdave on Mar 27, 2021 0:15:23 GMT -5
Okay, he never D&T'd it but if you look close you'll see two small plugs (screws) on the side of the receiver. I'd be curious to know if that Lyman would fit these holes. That's the place and as said above Lyman, Redfield, Williams, etc should have you in business.
|
|
|
Post by squawberryman on Sept 25, 2021 19:21:56 GMT -5
Now he's down to three. You don't want to know what I paid for this 44 magnum.
|
|
edk
.375 Atomic
Posts: 1,105
|
Post by edk on Sept 26, 2021 1:45:18 GMT -5
Now he's down to three. You don't want to know what I paid for this 44 magnum Besides a bit of sticker shock over the past couple years I really don't think firearms have inflated/appreciated any more than anything else since the glory days. On balance everything from a Snickers bar to a new pickup truck have gone up nearly as much. It is often said you have to pay to play. Got me a 336 in 35 Rem from those days. It is not a waffle top but it is pre-crossbolt safety. I still like it: smoooth action, accurate enough.
|
|
|
Post by squawberryman on Sept 26, 2021 4:08:35 GMT -5
By you don't wanna know means we went by the blue book. Whoever writes the blue book doesn't look at Gunbroker.
|
|
|
Post by x101airborne on Sept 27, 2021 15:02:44 GMT -5
By you don't wanna know means we went by the blue book. Whoever writes the blue book doesn't look at Gunbroker. Thats a dog gone fact.
|
|
|
Post by smokeeater2 on Sept 27, 2021 16:12:05 GMT -5
The shortages have made it a sellers market on GB for sure. The asking price for a run of the mill Black Hawk right now is crazy and JM Marlins keep edging up.
I've noticed they're getting relisted a lot so apparently people have hit the top end of what they'll pay.
If Ruger ever gets Marlin's to market I'm hoping prices will ease off a bit.
|
|
|
Post by squawberryman on Sept 27, 2021 17:12:24 GMT -5
I hope if Ruger ramps up production they don't just plug in the machines and make them the same way. I'm not in the market for one but a standard finish upgrade would be nice. Given that Ruger's "custom shop" isn't so custom, I doubt they'll go that route. Get with me in ten years, I'll tell you what happened.
|
|
rWt
.375 Atomic
Posts: 1,438
|
Post by rWt on Sept 28, 2021 15:10:42 GMT -5
|
|
|
Post by x101airborne on Sept 28, 2021 21:18:05 GMT -5
"Interesting" doesn't even begin to cover it!!!
|
|
rWt
.375 Atomic
Posts: 1,438
|
Post by rWt on Sept 29, 2021 5:59:33 GMT -5
|
|