|
Post by 2 Dogs on Jan 24, 2021 21:08:47 GMT -5
This is a Miha brass Cramer style mold. 2 or 4 cavity. Plain base or Gas Check but not both in the same mold. What can I say but that this bullet is a dandy. Jeff Hoover and I both concluded after extensive testing of available 32 caliber bullets and sixguns that in the 32 H&R the bullets in the 85-100 grain weight range were more likely to give exceptional accuracy. This particular design also lends itself well to the "older" or "classic" 32s and 32-20s that need to be treated or loaded for more "gently" for long life. On the other end, I have shot this bullet out of my personal Single Six Ruger 32 H&R Magnums very hard and did not injure my Single Six 32s in the least. Here is a target I shot at 100 yards on a breezy day in S. Texas and my favored load for my personal Ruger 32 Single Six. That Single Six right there retired all my 22s for "killing" or "ranch chores" and makes the 22 magnum just about irrelevant. Here is the MP mold 314-640 100 grain Large HP bullet. It will come with at least 2 size HP pins as per Miha as well as a pin for casting solids. I will update the pricing as soon as I see the pay pals for the Sledgehammer and please direct any questions to me so that I can update this post as needed. As always, I need your email in disguised form, number and type of molds you want. Remember Miha's first language is not English so don't get too complex here. This format works fine: Imashooter AT zmail DOT com When the buy closes, Miha will email out invoices. These buys can take some time so we will get prices when we get closer. 2 Cavity Plain Base 01. dougader AT hotmail DOT com....1 mold
|
|
|
Post by dougader on Jan 26, 2021 21:22:07 GMT -5
Would love a 2 cavity, plain base of this one to add to my Mjollnir 327 mold.
This should work great in 32's around our place.
dougader AT hotmail DOT com
|
|
Fowler
.401 Bobcat
Posts: 3,556
|
Post by Fowler on Jan 26, 2021 22:28:18 GMT -5
I have one of these molds, I cast them fairly soft and run them in my 32 mag and they are devastating to small vermin even at moderate speeds. Cast a bit harder you can lean on them as much as you dare.
|
|
|
Post by boolitdesigner on Jan 27, 2021 8:20:19 GMT -5
I have one of these molds, I cast them fairly soft and run them in my 32 mag and they are devastating to small vermin even at moderate speeds. Cast a bit harder you can lean on them as much as you dare. I dare as I shoot them out of s 303 British rifle at beyond 327 velocities. No survivors to date.
|
|
|
Post by dougader on Jan 30, 2021 12:45:22 GMT -5
What brand and size of gas checks do you guys use on the 32's?
|
|
gregs
.30 Stingray
Posts: 454
|
Post by gregs on May 8, 2021 22:10:16 GMT -5
30 cal hornady checks
|
|
|
Post by 2 Dogs on May 23, 2021 9:23:33 GMT -5
updated
|
|