tj3006
.375 Atomic
Posts: 1,965
|
Post by tj3006 on Jun 29, 2020 17:45:15 GMT -5
Been waiting all day for my pkg, I thinks it is my .327 federal Back from Bobby Tyler ! I have a bunch of loads for me all loaded up. But thinking of loading up some 85 grain Hornady XTPs for my Grand kids. I have some W-231 True Blue , HS-6 and Unique, That all should work, anybody here played with this bullet and any of those powders ? I think at 11 and 13 they should not be to awfully intimidated by 900 fps loads fired from my 5.5 inch Bisley ! And if it is strait shooting enough would be a good rabbit load too ! ...tj3006
|
|
|
Post by bushog on Jun 29, 2020 18:00:26 GMT -5
Have any .32 H&R or S&W brass?
|
|
princeout
.375 Atomic
Enter your message here...
Posts: 2,001
|
Post by princeout on Jun 29, 2020 18:35:56 GMT -5
tj, PM your address and I’ll send you some H&R brass. Tim
|
|
|
Post by Encore64 on Jun 29, 2020 18:43:58 GMT -5
327 Federal brass works fine with Unique. I use it all the time with cast bullets. Should work just fine with jacketed too.
Try 4.5 grn and you should be in great shape. I'd avoid magnum primers.
|
|
tj3006
.375 Atomic
Posts: 1,965
|
Post by tj3006 on Jun 29, 2020 20:09:51 GMT -5
Thanks Guys ! I have lots of Unique on hand so i will try it, I don,t use Magnum primers in the .327 federal , with AA#9 My load is 11 grains, I just put together A box of 2400 loads, 36 at 10.5 an 14 at 11 grains , With Charges that Small i think Standard primers are fine ! I have shot mostly a 115 grain bullet from Badman Bullets, It does not leave much Room in the Cylinder , I want to try the 125 Grain GT, and there 100 grain HP also...tj
|
|