RatCat
.240 Incinerator
Posts: 15 
|
Post by RatCat on Apr 1, 2018 17:40:36 GMT -5
Please add me to the alternate (hopefully round two) list:
1. OM standard hammer with Bisley spur, wide standard trigger, Bisley trigger.
2. OM Single Six standard hammer with Bisley spur, wide standard trigger, Bisley trigger.
So two hammers, four triggers.
And the dream list would be for OM triggers with the tabs to use NM trigger springs. If this option is available, make my selection triggers with the NM spring tab. |
|
|
|
Post by bushog on Apr 1, 2018 17:44:15 GMT -5
David makes those too......
|
|
|
|
Post by dixiejack on Apr 2, 2018 17:01:36 GMT -5
Fermin put me on your alternate list for: 1 Bisley Spur OM hammer with standard trigger.----georgelcarterATyahooDOTcom
Dixiejack
|
|
|
|
Post by 2 Dogs on Apr 10, 2018 14:56:46 GMT -5
As it turns out, the material Clements had set aside for these hammers is not going to work.
New material will have to be ordered and prepared in order to fill these orders. This material will have to be heat treated and then all the holes located and drilled. This is going to take some time.
So, we are back to square one. I am going to maintain this list however, we will eventually see out hammers from Dave. You just have to understand the product is not going to leave his shop unless it is perfect. So, at some point as time permits, I will either edit the original post or just start a whole new list.
Thanks for your patience.
|
|
|
|
Post by 500fksjr on Apr 10, 2018 17:24:02 GMT -5
OUCH!!
|
|
|
|
Post by alukban on Apr 10, 2018 19:14:23 GMT -5
No hurry on my end. I don’t believe there will be an alternative source for these hammers any time soon anyway  |
|
|
|
Post by 2 Dogs on Apr 11, 2018 13:39:21 GMT -5
I’m sorry Frank, believe me this news wasn’t any fun to deliver especially after I was able to convince him to make these for us in the first place. |
|
|
|
Post by blacktailslayer on Apr 11, 2018 13:40:43 GMT -5
Dang! I am not progressing on my project that this hammer is intended for either so I can definately wait.
Thanks for the heads-up Fermin.
Don D.
|
|
|
|
Post by newrugersafan on Apr 11, 2018 16:42:52 GMT -5
Fermin please add me to your list also, I did not get on the original list so that the guys with projects had an opportunity to get the first bunch but if he is going to have to buy materials I'd like to be on the wait list. I would like a Bisley Old Model hammer for non Bisley grip frame and a standard trigger.
Thanks Mike
|
|
|
|
Post by 2 Dogs on Apr 13, 2018 17:05:45 GMT -5
Mike, check the alternate list at the bottom of the first page. See if I got your email address right please.
When I get a minute I will edit the thread and put all the lists together.
|
|
|
|
Post by dixiejack on Apr 13, 2018 17:32:14 GMT -5
What happened to the ones on the alternate list? Dosesn't seemed like it mattered where anyone was on the list. Live and learn.
Dixiejack
|
|
|
|
Post by 2 Dogs on Apr 16, 2018 13:19:25 GMT -5
What happened to the ones on the alternate list? Dosesn't seemed like it mattered where anyone was on the list. Live and learn. Dixiejack I am going to edit the whole thing to just be one waiting list as soon as I can put the fire out that is burning the seat of my pants off.... |
|
jgt
.327 Meteor
Enter your message here...
Posts: 813
|
Post by jgt on Apr 17, 2018 9:15:55 GMT -5
Fermin don't worry about the seat of your pants being burned off, that'll keep the Knats out of your eyes.
|
|
|
|
Post by newrugersafan on Apr 22, 2018 23:01:04 GMT -5
Thank you for putting this together for us Fermin.
Mike
|
|
|
|
Post by blacktailslayer on Mar 1, 2019 15:24:27 GMT -5
Fermin, I don't want to rock the boat and I believe that I am a rather patient man. However, it had been nearly a year since this one started, is this still on his radar?
Don D.
|
|
