gregs
.327 Meteor
Posts: 528
|
Post by gregs on Dec 24, 2017 5:17:51 GMT -5
4c 220 with all pins please. Gpspero 64 at G mail dot com.
|
|
|
Post by Rockwell on Dec 24, 2017 12:58:57 GMT -5
220 gr 4C no lube groove, all pins please rockwell 5926 at gmail dot com
|
|
|
Post by 2 Dogs on Dec 24, 2017 16:17:48 GMT -5
Keep signing up guys. We will get this diagram chased down, I'm not sure what all weights are available but we will see what all requests we have and get some proper lists up soon.
|
|
|
Post by zeus on Dec 27, 2017 15:57:37 GMT -5
I'm in for a 220 4C mold boo-haaa at hot mail dot com Same for me Gswaggart at gmail dot com
|
|
|
Post by magnumwheelman on Dec 27, 2017 16:57:54 GMT -5
OK... me too
mikeatplevkafarm (at) gmail dot com
will figure out the bullet profile when that is posted
|
|
|
Post by 2 Dogs on Dec 27, 2017 20:03:03 GMT -5
As I recall, these molds were available up to 220 grains as there were a number of lighter weights available as well. Those of you who are wanting a lighter 10mm cast bullet need to post your wants here as well. It's no more trouble to keep several lists than it is just one. As I recall, the 10mm bullet weights started about 135 grains, but please correct me if I am wrong!
|
|
|
Post by rjm52 on Dec 28, 2017 10:44:15 GMT -5
I'll take a 220 brass 4-cavity with all pins and standard lube groove.
vitalsupplynh at gmail dot com
If other weights are available on this order please let me know.
Thanks..Bob
|
|
|
Post by bushog on Dec 28, 2017 12:24:05 GMT -5
As I recall, these molds were available up to 220 grains as there were a number of lighter weights available as well. Those of you who are wanting a lighter 10mm cast bullet need to post your wants here as well. It's no more trouble to keep several lists than it is just one. As I recall, the 10mm bullet weights started about 135 grains, but please correct me if I am wrong! I've got: 402-150 402-170 402-190 All are 4C HP molds.
|
|
|
Post by coldtriggerfinger on Dec 28, 2017 13:58:04 GMT -5
2 Dogs; really appreciate you doing this ! I've been wanting to get a 10mm mold and wanted this one . I had looked but not found it. Hopefully Everything will be here so I can get some cast and loaded before the punks in fur coats get out a bed.
Bushog, you must shoot lots of 40/10mm . That's quite a collection!
|
|
|
Post by 2 Dogs on Dec 28, 2017 15:53:15 GMT -5
2 Dogs; really appreciate you doing this ! I've been wanting to get a 10mm mold and wanted this one . I had looked but not found it. Hopefully Everything will be here so I can get some cast and loaded before the punks in fur coats get out a bed. Bushog, you must shoot lots of 40/10mm . That's quite a collection! Coldtriggerfinger thanks, those of us who have been dealing with MP molds for the past several years already know that patience is a requirement. The quality he puts out cannot be rushed. Besides, it's the time of the year for family and vacationing and such. I just need you guys to keep posting your wants and needs. We will get the diagrams soon enough. I may be that Miha, given enough orders, might do odd numbers as long as they are all 10mms because the HP pins would be the same. So, 12 molds in 220, 10 more in 190, 8 molds in 150, etc.. might just work for him. All we can do is get a list together. When he is ready he will look at it and decide how best to proceed.
|
|
|
Post by coldtriggerfinger on Dec 28, 2017 18:01:54 GMT -5
Great ! I'm not actually in a hurry . I have 2 of his molds and they are excellent. One for my Ruger 45 Colt and one for my 480. I can keep some Buffalo Bore 220 gr TC hard cast in my gun until the mold arrives .
|
|
|
Post by rjm52 on Dec 29, 2017 8:13:14 GMT -5
I also appreciate your efforts 2 dogs... I had been wanting this mold but had missed the last group buy over on the Cast Boolit Forums... Was just about to order an Accurate 40-215 when I saw this come up.
As to other molds in 10mm...does anyone know if this bullet was done in a 165-170 grain when cast as a solid. I've found the 165 grain weight the best for my general shooting in .40 S&W and 10mm. This weight has the same sectional density as a 125/.357, 170/.41, 180/.429 and 200/.45 which to me are the best weights for self-defense work when run in the 1250-1450 fps range.
A 200 grain 10mm would be the same as a 210 grain .41 and a 220 the same as a 230. Pushed to 1150-1300 fps would be just about the same as carrying a 4" .41 Magnum.
I've got MeHic molds in 9mm, .357, .41 and .45...they are works of art...
Bob
|
|
|
Post by bushog on Dec 29, 2017 8:51:10 GMT -5
I also appreciate your efforts 2 dogs... I had been wanting this mold but had missed the last group buy over on the Cast Boolit Forums... Was just about to order an Accurate 40-215 when I saw this come up. As to other molds in 10mm...does anyone know if this bullet was done in a 165-170 grain when cast as a solid. I've found the 165 grain weight the best for my general shooting in .40 S&W and 10mm. This weight has the same sectional density as a 125/.357, 170/.41, 180/.429 and 200/.45 which to me are the best weights for self-defense work when run in the 1250-1450 fps range. A 200 grain 10mm would be the same as a 210 grain .41 and a 220 the same as a 230. Pushed to 1150-1300 fps would be just about the same as carrying a 4" .41 Magnum. I've got MeHic molds in 9mm, .357, .41 and .45...they are works of art... Bob Here... www.mp-molds.com/e-shop/molds/solid-molds/mp-402-170-pb
|
|
|
Post by rjm52 on Dec 29, 2017 12:20:55 GMT -5
|
|
|
Post by 2 Dogs on Dec 30, 2017 1:03:29 GMT -5
Thank you Bob, and I too if afforded the opportunity would opt for the lightest weight 10mm bullet myself.
|
|