|
Post by AxeHandle on Nov 22, 2017 7:57:25 GMT -5
Ordered this thing a while back through an employee program. Ordered a threaded Alphawolf barrel at the same time. Just got notification from Symrna GA that it has shipped to my FFL. Holding a Trijicon RMR that I'm thinking will go on the slide. Ghost Edge 3.5 connector in the parts box. Dillon delivered a 10mm conversion for one of the SDBs out in the shop. Simply Rugged Chesty Puller harness and Cuda holster waiting too. Pictures early next week...
|
|
|
Post by Quick Draw McGraw on Nov 22, 2017 12:52:53 GMT -5
Do the Alphawolf Barrels have full change support? I went with KKM because they do.
|
|
|
G40
Nov 22, 2017 23:50:14 GMT -5
via mobile
JSutter likes this
Post by ss30378 on Nov 22, 2017 23:50:14 GMT -5
Yes the alphawolf series has full support. Much better than the dasan series of barrels.
|
|
|
Post by AxeHandle on Jan 21, 2018 7:56:31 GMT -5
First round of parts installed. RMR, Alpha Wolf threaded barrel, Ghost connector... Gun shoots good to be a plastic fantastic. Adding an Agency trigger and a steel guide rod this week. All that size and weight really soaks up the 10mm recoil.
|
|
|
G40
Jan 22, 2018 0:56:07 GMT -5
Post by dougader on Jan 22, 2018 0:56:07 GMT -5
Pics?
|
|
|
Post by AxeHandle on Jan 22, 2018 8:19:31 GMT -5
Pics? Soon!
|
|
|
Post by AxeHandle on Jan 22, 2018 17:37:32 GMT -5
Left Side
|
|
|
Post by AxeHandle on Jan 22, 2018 17:38:03 GMT -5
Right Side
|
|
|
Post by AxeHandle on Jan 22, 2018 17:39:01 GMT -5
RMR
|
|
|
Post by AxeHandle on Jan 22, 2018 17:40:15 GMT -5
"Thug Plug" a solid cast steel piece that plugs the hole and adds a little weight.
|
|
|
G40
Jan 22, 2018 17:45:34 GMT -5
Post by AxeHandle on Jan 22, 2018 17:45:34 GMT -5
Agency trigger and steel guide rod in route... Looking for a set of tall suppressor sights. This Trijicon is on ALL the time. Trijicon says put in a new battery once a year. A well repected product. It looks good. Then they charge me $30 for the two screws to mount it on the Glock. This is the LAST trijicon product that I will EVER buy.
|
|
|
Post by AxeHandle on Jan 22, 2018 17:51:14 GMT -5
Beast is getting heavier very day. Started so big and heavy that it doesn't matter. At best it will be a tree stand gun. Off hand shooting at 25 yards looks pretty good. A good rest rest and one might expect it to be capable of one inch groups at 25 yards. Let me get a trigger in it and I'll shoot groups to post.
|
|
|
Post by AxeHandle on Jan 26, 2018 7:50:21 GMT -5
Shipping tracker says the trigger and guide rod are in Birmingham. Says expect it Saturday. I'm thinking today!
|
|
|
Post by matt56 on Jan 26, 2018 20:08:44 GMT -5
I have a G40 also. It's my only semi-auto anything. I put a nitrided KKM barrel in it so I could shoot cast a little easier and maybe not bulge the brass so much. That's been working out great so far.
I cast 2 bullets for it right now. A 180gr flat nose and a 200gr WFNGC. I was getting some lead with the 180gr plain base but since I switched to powder coating lead is no longer an issue. The gun is far more accurate than me too. I can knock down 1/2 scale pigs at 50 yds if I take my time.
|
|
|
G40
Jan 27, 2018 7:02:14 GMT -5
Post by AxeHandle on Jan 27, 2018 7:02:14 GMT -5
Agency trigger arrived yesterday. Uses a straight metal trigger with a polished OEM trigger bar and a polished OEM minus connector. I'll post pics of the trigger soon.
|
|